Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Haltech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Haltech E11V2 is a E series programmable engine-management model. The Haltech E11V2 specification lists up to 12 injector outputs, four PWM outputs, seven auxiliary analogue inputs and four auxiliary digital inputs. Injection and ignition outputs share physical resources in some configurations. Manufacturer specification or guide.

Identification and output allocation

Record the full ECU label, serial number, hardware or harness revision, software and existing calibration. These characteristics are model-specific; a superficially similar E series ECU should not be treated as a drop-in replacement. Counts can be limited by shared outputs, external modules and the engine's ignition and injection strategy.

Model-specific pinout and wiring

Consult the E11V2 wiring documentation and the historic model manuals and connector archive where applicable. Select the named model and the precise harness revision; read its numbered connector view, driver characteristics, injector supply, power and ground notes. The connector appearance alone is not proof of identical pin functions.

Software and further information

legacy software matching the model. Haltech's download centre separates software and provides a legacy section. See Haltech standalone ECUs for the other families.