Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
SCS Delta standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
SCS Delta 880 ECU
SCS Delta 880 ECU. Image: SCS Delta SXTune hardware reference; reproduced with permission.

SCS Delta 880 is a programmable SCS Delta engine-management controller. Legacy two-connector Delta unit listed separately from the 800 in the SXTune hardware archive. The reference shows two throttle bridges, wheel-speed inputs, knock inputs and gearshift-related assignments. Its defaults differ from the 800, so similar-looking plugs do not prove a direct swap. SXTune 880 hardware reference.

Pinout and connector identification

A17 is the gear-position sensor input in the documented application; B9 is a configurable output, B10 is gearshift air-pressure relay, B15 is gear-up solenoid and B16 gear-down solenoid. B1–B4 are the two throttle bridge pairs. These are the documented application functions, not universal settings. The complete 880 connector pinout identifies every pin, its electrical description and the diagram. Numbering is model-specific; verify the connector view, supply fuses and the calibration. Adjacent models can use the same connector family with different functions.

Calibration and installation

Record hardware identity, firmware and the existing calibration. The SXTune documentation covers crank and cam setup, sensor configuration, electronic throttle, output testing, data logging and CAN. Capabilities depend on the exact unit and firmware; the presence of a menu in shared software does not establish hardware support. Match sensors, coil and injector drivers and fuse values to the original model documentation before applying power.

See SCS Delta family guide, the manufacturer legacy upgrade notes and the wiring index.