DTAFast E48 is a historic programmable engine-management identity documented in the manufacturer's model wiring schematic. The 30 March 2001 manufacturer schematic is labelled E48EXP and E48EXP ignition only. It illustrates two coil outputs, injector connections, configurable auxiliary and sensor functions; establish the exact build before assuming fuel drivers are present.
Identification
Identify the actual case label, harness connectors, output configuration and firmware. An old loom may have been modified for a particular engine. No current product availability or universal support status is inferred from this historical schematic.
Model-specific pinout and wiring
The manufacturer E48 drawing supplies connector views, functions, sensor/actuator examples and grounding. The linked document explicitly covers both E48EXP and its ignition-only version; confirm which electronics are fitted before connecting injectors. Match connectors and diagram orientation to the actual ECU; do not transfer pin assignments from another E- or S-series model.
Related documentation
DTAFast's wiring archive includes crank sensor rules and legacy ECU sheets. Confirm support, software and hardware serviceability directly with DTAFast. See the DTAFast family overview.