SCS lists Tornado 2 separately in its obsolete 2008–2015 hardware programme and identifies Delta 700 as its replacement, with a connector change required. An archived S65 installation is reported for a Tornado 2, but this example does not prove compatibility with all S65 engines or harnesses. Manufacturer or supplier evidence.
Identification, software and support
Record the complete ECU label, hardware revision, original application, connector type and current calibration. SCS identifies the older Typhoon, Tornado, Storm and Hurricane families with its final SXT Legacy software. Its newer Delta devices use the current SXTune release. The availability of calibration migration does not mean the same project should be written to different hardware without conversion. SCS software downloads · manufacturer upgrade notes.
Model-specific wiring
A third-party display interface guide identifies Tornado 2 connector A pin 21 as CAN high and pin 22 as CAN low. It links a Tornado V3 diagram; this identifies communications only and is not a full engine-harness pinout. Confirm the exact unit and get the original loom diagram. PLEX Tornado 2 connection guide.
Replacement and calibration
SCS identifies Delta 700 as the replacement for this model in its trade-in list. Consult SCS about ECU-specific connector changes, harness, software and calibration before making any conversion. See the SCS model index for the separate Delta reference.