Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
SCS Delta standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Manufacturer identifies Typhoon 2 as an older, unsupported ECU and lists Delta 400 as its replacement. A Specialist Components downloads page labels the available document Typhoon 2, while the linked PDF is titled Typhoon V3; check the exact hardware revision rather than assuming these labels describe every unit. Manufacturer or supplier evidence.

Identification, software and support

Record the complete ECU label, hardware revision, original application, connector type and current calibration. SCS identifies the older Typhoon, Tornado, Storm and Hurricane families with its final SXT Legacy software. Its newer Delta devices use the current SXTune release. The availability of calibration migration does not mean the same project should be written to different hardware without conversion. SCS software downloads · manufacturer upgrade notes.

Model-specific wiring

The linked supplier file is titled Typhoon V3 Pin-out: its 35-way AMPSeal 776164-1 shows pins 1 battery, 2 ignition, 3 power ground, 4–7 injector 1–4, 9 crank, 10 cam 1, 21 CAN high and 22 CAN low. A supplier labels its download “Typhoon 2”. Verify that the label and pinout match the physical unit. Typhoon V3 pinout PDF · supplier download listing.

Replacement and calibration

SCS identifies Delta 400 as the replacement for this model in its trade-in list. Consult SCS about ECU-specific connector changes, harness, software and calibration before making any conversion. See the SCS model index for the separate Delta reference.