Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
SCS Delta standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Manufacturer lists Typhoon as an older generation ECU sold within 2008–2015, no longer supported because of component obsolescence. SCS describes Delta 400 as a direct replacement for Typhoon without wiring changes, subject to exact vehicle/application checks. Manufacturer or supplier evidence.

Identification, software and support

Record the complete ECU label, hardware revision, original application, connector type and current calibration. SCS identifies the older Typhoon, Tornado, Storm and Hurricane families with its final SXT Legacy software. Its newer Delta devices use the current SXTune release. The availability of calibration migration does not mean the same project should be written to different hardware without conversion. SCS software downloads · manufacturer upgrade notes.

Model-specific wiring

A complete verified pinout for this precise legacy variant was not established here. Obtain the original ECU and harness diagram from SCS before wiring; the Delta 400 drawing is not evidence of every original pin's electrical function.

Replacement and calibration

SCS identifies Delta 400 as the replacement for this model in its trade-in list. Consult SCS about ECU-specific connector changes, harness, software and calibration before making any conversion. See the SCS model index for the separate Delta reference.