Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Individual ECU model references

Further historically documented names are listed below; a name without a linked model page does not yet have a standalone reference.

Link produces wire-in and vehicle-specific programmable engine controllers. Record exact generation, model, revision and harness before wiring. Link documentation.

Link G5 Voodoo Pro ECU
G5 Voodoo Pro: Link ECU. Permission to republish confirmed by the user.

Models and generations

Special versions and individual plug-in boards are not exhaustively listed. Select the PCLink software appropriate to the ECU and firmware.

Example pinout: G4X MonsoonX A connector

34-way connector, numbered from the loom wire side, equivalent to looking into the ECU header, as illustrated in Link's MonsoonX quick-start guide. Grouped rows give positions in the same order as functions.

PinFunction
1–4Injector 4, 3, 2, 1
5+14 V
6DI 4 / knock (see revision note)
7Trigger shield / ground
8Trigger 1
9Trigger 2
10–13Ignition 4, 3, 2, 1
14Analogue voltage 4
15Temperature 1
16Temperature 2
17Analogue voltage 1
18–21Auxiliary outputs 4, 3, 2, 1
22Analogue voltage 2
23Digital input 3
24Sensor ground output
25Ground
26Auxiliary output 6
27Auxiliary output 5
28CAN high
29CAN low
30Digital input 1
31Digital input 2
32+5 V output
33Analogue voltage 3
34Ground

Pin 6 is DI 4 or knock input. MonsoonX hardware version 3 and newer supports knock control there; earlier hardware does not. Functions and ratings are model-dependent. Link comparison of G4 Storm and G4X wiring.

Further documentation

Sources reviewed 17 November 2026.