The Antares 4 is a Cosworth Antares family ECU and vehicle controller. Cosworth describes it as a lower-cost entry in its Antares range while retaining data-logging and powertrain-control functions. Cosworth product information.
Manufacturer product specification
Cosworth's Antares 4 product page describes optimisation for 4-cylinder GDI or 8-cylinder port injection; it lists 3 CAN ports, 4 GB logging, two onboard lambda inputs, two knock inputs and three H-bridge pairs. Maximum counts include alternative functions, so they are not necessarily simultaneously available. Confirm hardware and enabled strategy against the current build.
A separate family comparison leaflet gives different cylinder/driver figures from the product page; these should not be reconciled without revision-specific confirmation. Use the exact build sheet and software from Cosworth for the installation.
Identification and control
Confirm the exact ordered configuration and obtain the matching connector and calibration documents from Cosworth. Antares family feature headlines do not establish that every feature is enabled on this particular unit. Document the exact part number, serial, software build, calibration, championship configuration and any security or software option before assessing compatibility.
Connectors and wiring
Review the model-specific Cosworth document and request the current build sheet where necessary. Connector and driver assignments may be model-, build- and configuration-dependent. Sensor supplies, peak driver currents, earths and high-voltage injector circuits must be matched to the official document.
Software and support
Cosworth's Pectel application notes cover model-specific strategies; confirm toolchain and access level with the supplier. See the Cosworth Pectel and Antares family for related controllers.