Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Emerald standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Emerald M3DK is an Emerald engine-management designation. Produced March 2001 to February 2007, M3DK was Emerald's first 32-bit ECU, intended primarily for four-cylinder normally aspirated or boosted engines. It has four injector drivers and two internal ignition drivers, RS232 communication, idle control and Rover MEMS immobiliser provisions. Emerald manufacturer information.

Identification and configuration

Identify the exact hardware and serial number. Emerald notes that some units have bespoke software for non-standard installations, and that many M3DK units were upgraded to K3 specification. An old case label alone cannot establish the internal specification. Emerald earlier ECU information; software and manuals.

Emerald provides a K3/K6 software family separately from M3DK software. Its K6 generic and preconfigured packages are ordering/configuration choices; a base map is a starting point requiring matching and calibration for the actual engine.

Pinout, harness and software

The M3DK manual v5 includes a 36-way connector table and distinguishes individual sensor and output assignments. Some M3DK ECUs were upgraded to K3 specification; establish the actual internals before wiring. Manufacturer manual or documentation. Use terminal markings, exact connector view and the source's wiring and driver notes. A model-specific adapter for an original vehicle harness is distinct from the generic connector assignment.

See Emerald adapter catalogue and Emerald standalone ECU overview.