Emerald K3 is an Emerald engine-management designation. Produced February 2007 to April 2010, K3 is documented with six injector drivers and three internal ignition coil drivers. Its features include adaptive lambda using a compatible external wideband controller, triple map switching and CAN dashboard data. Emerald manufacturer information.
Identification and configuration
Identify the exact hardware and serial number. Emerald notes that some units have bespoke software for non-standard installations, and that many M3DK units were upgraded to K3 specification. An old case label alone cannot establish the internal specification. Emerald earlier ECU information; software and manuals.
Emerald provides a K3/K6 software family separately from M3DK software. Its K6 generic and preconfigured packages are ordering/configuration choices; a base map is a starting point requiring matching and calibration for the actual engine.
Pinout, harness and software
The K3-specific connector pin table is transcribed in the manufacturer overview; check the manufacturer's K3 manual v057 and the ECU's configuration. Manufacturer manual or documentation. Use terminal markings, exact connector view and the source's wiring and driver notes. A model-specific adapter for an original vehicle harness is distinct from the generic connector assignment.
See Emerald adapter catalogue and Emerald standalone ECU overview.