Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Emerald standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Emerald K6+ is an Emerald engine-management designation. Six injection and six ignition drivers; three speed triggers; TPS and/or MAP load; CAN 2.0B; triple map switching. The generic unit is supplied with starting maps and configurations that still require engine-specific setup. Emerald manufacturer information.

Emerald K6+ ECU
K6+ product image: Emerald M3D; permission to republish confirmed by the user.

Identification and configuration

Identify the exact hardware and serial number. Emerald notes that some units have bespoke software for non-standard installations, and that many M3DK units were upgraded to K3 specification. An old case label alone cannot establish the internal specification. Emerald earlier ECU information; software and manuals.

Emerald provides a K3/K6 software family separately from M3DK software. Its K6 generic and preconfigured packages are ordering/configuration choices; a base map is a starting point requiring matching and calibration for the actual engine.

Pinout, harness and software

Use the K6/K6+ documentation and the actual configuration in the manufacturer's manuals index. A DBW part-loom wiring diagram applies only to its stated configuration. Manufacturer manual or documentation. Use terminal markings, exact connector view and the source's wiring and driver notes. A model-specific adapter for an original vehicle harness is distinct from the generic connector assignment.

See Emerald adapter catalogue and Emerald standalone ECU overview.