Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Cosworth Pectel standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Cosworth launched the Pectel MQ12 in 2008 to replace its T10s. Its sheet describes 20 configurable injector/PWM drivers, 12 IGBT and 16 logic-level ignition outputs, with fully sequential fuelling for up to 12 cylinders. Cosworth product information.

Identification and control

The MQ12 sheet includes connector pinouts and ratings, 22,000 rpm capability, two lambda inputs, eight knock inputs and software-configurable shared functions. Hardware options and strategy licensing must be checked. Document the exact part number, serial, software build, calibration, championship configuration and any security or software option before assessing compatibility.

Connectors and wiring

Review the model-specific Cosworth document and request the current build sheet where necessary. Connector and driver assignments may be model-, build- and configuration-dependent. Sensor supplies, peak driver currents, earths and high-voltage injector circuits must be matched to the official document.

Software and support

Cosworth's Pectel application notes cover model-specific strategies; confirm toolchain and access level with the supplier. See the Cosworth Pectel and Antares family for related controllers.