Removed text is struck through; added text is highlighted.
Link G4+ Xtreme is a programmable G4+ wire-in engine-management ECU. A/B loom unit with electronic-throttle outputs. The guide says PCB v1.3b and earlier have DI 9/10 only; PCB v1.4 and later can use those pins for DI 9/10 or CAN 2. Link G4+ Xtreme quick-start guide.
Model identification and I/O
ItemDocumented detailsECU familyG4+Outputs8 injection and 8 ignition drivesProgrammingPCLink version matched to ECU generation and firmwareConnector and loomSee the exact-model guide, including connector keys, wire-side orientation and optional functions
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4+ Xtreme quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Software and further sources
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.
G4+ Xtreme black-series package as shown in Link’s catalogue; other revisions differ. Image: Link Engine Management G4+ catalogue, reproduced with permission.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Link G4+ Xtreme
Link G4+ Xtreme is a programmable G4+ wire-in engine-management ECU. A/B loom unit with electronic-throttle outputs. The guide says PCB v1.3b and earlier have DI 9/10 only; PCB v1.4 and later can use those pins for DI 9/10 or CAN 2. Link G4+ Xtreme quick-start guide.
Model identification and I/O
Item
Documented details
ECU family
G4+
Outputs
8 injection and 8 ignition drives
Programming
PCLink version matched to ECU generation and firmware
Connector and loom
See the exact-model guide, including connector keys, wire-side orientation and optional functions
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4+ Xtreme quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Software and further sources
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.
Revision 2: Link G4+ Xtreme
Link G4+ Xtreme is a programmable G4+ wire-in engine-management ECU. A/B loom unit with electronic-throttle outputs. The guide says PCB v1.3b and earlier have DI 9/10 only; PCB v1.4 and later can use those pins for DI 9/10 or CAN 2. Link G4+ Xtreme quick-start guide.
Model identification and I/O
Item
Documented details
ECU family
G4+
Outputs
8 injection and 8 ignition drives
Programming
PCLink version matched to ECU generation and firmware
Connector and loom
See the exact-model guide, including connector keys, wire-side orientation and optional functions
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4+ Xtreme quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Software and further sources
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.
G4+ Xtreme black-series package as shown in Link’s catalogue; other revisions differ. Image: Link Engine Management G4+ catalogue, reproduced with permission.