Removed text is struck through; added text is highlighted.
Link G4+ Atom is a programmable G4+ wire-in engine-management ECU. Earlier single A loom model; the quick-start lists two trigger inputs, three analogue voltage inputs and two temperature inputs. Link G4+ Atom quick-start guide.
Model identification and I/O
ItemDocumented detailsECU familyG4+Outputs4 injection and 4 ignition drivesProgrammingPCLink version matched to ECU generation and firmwareConnector and loomSee the exact-model guide, including connector keys, wire-side orientation and optional functions
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4+ Atom quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for cavity positions (the drawing prints no cavity numbers), wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.The A loom drawing from the quick start guide is redrawn with every cavity in Link G4+ Atom connector pinout.The G4+ Atom quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Software and further sources
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.
G4+ Atom as shown in Link’s catalogue; confirm the hardware revision. Image: Link Engine Management G4+ catalogue, reproduced with permission.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Link G4+ Atom
Link G4+ Atom is a programmable G4+ wire-in engine-management ECU. Earlier single A loom model; the quick-start lists two trigger inputs, three analogue voltage inputs and two temperature inputs. Link G4+ Atom quick-start guide.
Model identification and I/O
Item
Documented details
ECU family
G4+
Outputs
4 injection and 4 ignition drives
Programming
PCLink version matched to ECU generation and firmware
Connector and loom
See the exact-model guide, including connector keys, wire-side orientation and optional functions
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4+ Atom quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Software and further sources
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.
Revision 3: Link G4+ Atom
Link G4+ Atom is a programmable G4+ wire-in engine-management ECU. Earlier single A loom model; the quick-start lists two trigger inputs, three analogue voltage inputs and two temperature inputs. Link G4+ Atom quick-start guide.
Model identification and I/O
Item
Documented details
ECU family
G4+
Outputs
4 injection and 4 ignition drives
Programming
PCLink version matched to ECU generation and firmware
Connector and loom
See the exact-model guide, including connector keys, wire-side orientation and optional functions
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4+ Atom quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for cavity positions (the drawing prints no cavity numbers), wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.