Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
SCS Delta standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

SCS Delta 900 is a programmable SCS Delta engine-management controller. Delta 900 is a three-connector SCS ECU. The manufacturer's connector listing includes eight injector outputs, eight ignition outputs, dual throttle H-bridges, two sets of wideband lambda connections, knock inputs, two CAN channels and LIN. Confirm I/O allocation, output ratings and electrical features in the precise wiring document. SXTune 900 hardware reference.

Pinout and connector identification

B1–B2 and B3–B4 are throttle bridges 1 and 2. B9–B10 list injectors 7 and 8; B13–B16 list ignition 5–8. Connector C has separate sets of wideband connections C1–C5 and C13–C17, plus LIN at C8. The complete 900 connector pinout identifies every pin, its electrical description and the diagram. Numbering is model-specific; verify the connector view, supply fuses and the calibration. Adjacent models can use the same connector family with different functions.

Calibration and installation

Record hardware identity, firmware and the existing calibration. The SXTune documentation covers crank and cam setup, sensor configuration, electronic throttle, output testing, data logging and CAN. Capabilities depend on the exact unit and firmware; the presence of a menu in shared software does not establish hardware support. Match sensors, coil and injector drivers and fuse values to the original model documentation before applying power.

See SCS Delta family guide, the manufacturer legacy upgrade notes and the wiring index.