The DTAFast S80 Pro is an S-series programmable engine-management unit. Eight injector and eight coil drivers with two cam inputs in the historical DTA feature matrix. The S-series manual describes traction control on S80 Pro and above. DTAFast historical S-series feature matrix.
Hardware and operation
Refer to the manufacturer S80 Pro connector diagrams, sensor options and notes; outputs can be shared by configurable functions. Confirm the complete ECU label and revision; similarly named S-series units are separate records, and S-series capability differs from T-series. Record the number of injectors, coil arrangement, cam triggers and assigned auxiliary outputs before selecting a calibration.
Wiring and pinout
DTAFast S80 connector pinout and wiring gives connector views, supplies, grounds, sensor and actuator examples. Consult the documented firmware and circuit protection conditions; identify connector keyways and view direction before counting pins. A shared input or output can perform only the function assigned to it.
Software and additional references
The DTAFast S-series Pro manual describes DTASwin calibration software, data logging and model-specific settings. DTAFast S60 Pro product sheet provides an example of output and engine configuration limits. See the DTAFast model family for other ECUs.