Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
DTAFast standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

The DTAFast S60 Pro is an S-series programmable engine-management unit. Four injector and four coil drivers. The historical manufacturer product sheet describes four-cylinder sequential injection and coil-per-plug ignition, or up to eight cylinders with non-sequential injection and wasted spark; it supports one cam control. DTAFast historical S-series feature matrix.

Hardware and operation

The manufacturer's diagram labels separate power and sensor connectors and says output numbering follows firing order, not cylinder number. A cam sensor is required for sequential operation; the diagram specifies firmware V77.00 or newer for all illustrated options. Confirm the complete ECU label and revision; similarly named S-series units are separate records, and S-series capability differs from T-series. Record the number of injectors, coil arrangement, cam triggers and assigned auxiliary outputs before selecting a calibration.

Wiring and pinout

DTAFast S60 connector pinout and wiring gives connector views, supplies, grounds, sensor and actuator examples. Consult the documented firmware and circuit protection conditions; identify connector keyways and view direction before counting pins. A shared input or output can perform only the function assigned to it.

Software and additional references

The DTAFast S-series Pro manual describes DTASwin calibration software, data logging and model-specific settings. DTAFast S60 Pro product sheet provides an example of output and engine configuration limits. See the DTAFast model family for other ECUs.