Ignition-only controller for carburetted or historic engines; supports distributor ignition on up to 12 cylinders or wasted spark on up to four. It does not control fuel injectors. DTAFast T2i product information.
Features and application
Wideband lambda monitoring and logging, launch, closed-loop flat shift, boost and electric fuel-pump relay control are listed by DTAFast. The fuel pump can be commanded off when the engine stops. All T-series units use the T-Series PC software; DTAFast describes configurable inputs and outputs, integrated Bosch wideband measurement, logging, firmware updates and a built-in trigger oscilloscope. Available functions and channel limits depend on the exact model and firmware. Manufacturer specification.
Identification and wiring
Identify the printed model including any “+” or “i” suffix, hardware revision, connector and firmware before allocating pins. Configurable functions may differ from defaults. Manufacturer T2i wiring diagram and connector pinout contains connector orientation, cavity functions, power, earth and sensor examples. Follow its fuse and load requirements; do not interchange pin numbering with another T-series controller.
Software and related information
DTAFast provides model-specific wiring diagrams, firmware, manuals and PC software via its downloads section. Capture the existing calibration and firmware identifiers before making changes. See the DTAFast family overview for earlier S and E series models.