Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Haltech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 3

Removed text is struck through; added text is highlighted.

Haltech Elite 2500T (HT-151310) product photograph: Haltech product image library; reproduced with permission.

Haltech Elite 2500T is a programmable engine-management ECU in Haltech's Elite family. 2500-family unit with driveshaft and engine RPM targeting torque management in the manufacturer's comparison; confirm enabled features and firmware. Haltech universal comparison.

Identification and I/O

ItemManufacturer comparisonInjector channels8, peak-and-holdIgnition channels8Digital pulsed outputs5MAP sensor4 bar internalTuning softwareESP for Elite firmware 2.xx; NSP for Elite firmware 3.xx; verify installed firmware

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Elite 2500T ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

Haltech groups the Elite 2500 harness wiring diagrams under Elite 1500/2500/REM downloads. Confirm the 2500T hardware and exact harness with Haltech before applying a 2500 diagram.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Haltech Elite 2500T

Haltech Elite 2500T is a programmable engine-management ECU in Haltech's Elite family. 2500-family unit with driveshaft and engine RPM targeting torque management in the manufacturer's comparison; confirm enabled features and firmware. Haltech universal comparison.

Identification and I/O

ItemManufacturer comparison
Injector channels8, peak-and-hold
Ignition channels8
Digital pulsed outputs5
MAP sensor4 bar internal
Tuning softwareESP for Elite firmware 2.xx; NSP for Elite firmware 3.xx; verify installed firmware

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Elite 2500T ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

Revision 3: Haltech Elite 2500T
Haltech Elite 2500T ECU
Haltech Elite 2500T (HT-151310) product photograph: Haltech product image library; reproduced with permission.

Haltech Elite 2500T is a programmable engine-management ECU in Haltech's Elite family. 2500-family unit with driveshaft and engine RPM targeting torque management in the manufacturer's comparison; confirm enabled features and firmware. Haltech universal comparison.

Identification and I/O

ItemManufacturer comparison
Injector channels8, peak-and-hold
Ignition channels8
Digital pulsed outputs5
MAP sensor4 bar internal
Tuning softwareESP for Elite firmware 2.xx; NSP for Elite firmware 3.xx; verify installed firmware

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Elite 2500T ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

Haltech groups the Elite 2500 harness wiring diagrams under Elite 1500/2500/REM downloads. Confirm the 2500T hardware and exact harness with Haltech before applying a 2500 diagram.