Haltech Nexus S2 is a programmable engine-management ECU in Haltech's Nexus family. Designed for up to 4 cylinders or 2 rotors with full sequential fuel and ignition; 8 cylinders may use semi-sequential injection. One onboard wideband controller, two knock inputs, 11 analogue inputs, six synchronised inputs and up to two DBW throttles. Haltech universal comparison.

Identification and I/O
| Item | Manufacturer comparison |
|---|---|
| Injector channels | 4, peak-and-hold |
| Ignition channels | 4 |
| Digital pulsed outputs | 6 |
| MAP sensor | 4 bar internal |
| Tuning software | Nexus Software Programmer (NSP); verify installed firmware |
Haltech identifies the S-series as successors to the Elite 1500/2500, but says the ECU-side connectors differ and the harness must be repinned. The S-series has no onboard power-distribution module; check current and output ratings in the appropriate guide. S-series specification and upgrade notes.
Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.
Pinout and wiring
Use the manufacturer wiring diagrams and select the Nexus S2 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.
Software and further information
Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.