
Image: Canems, Injection ECU manual, release 2.03, reproduced from The Wedge Shop mirror with permission.
Canems engine management includes a programmable Injection ECU for fuel and ignition control. The historical release 2.03 guide describes up to eight cylinders with wasted spark and four injector drivers; this information does not establish a complete model catalogue.
Known systems and applications
- Canems Injection ECU, documented in releases 2.03 and 2.17 of the installation manual.
- Rover V8 conversion kit — an application package using a Canems ECU, rather than a separately verified ECU model name.
See Canems Injection ECU manual, release 2.03 and Rover V8 installation guide. A Rover V8 kit page shows the installation.
Injection ECU pinout — manual release 2.03
Thirty-way connector, positions 1A–3K. Use the numbered connector diagram in the manual to establish viewing orientation; this table is for the specific documented ECU and release. Serial connections are preconnected from the factory in this guide.
| Pin | Function |
|---|---|
| 1A | Injector earth |
| 1B | Injector bank 1 |
| 1C | Injector bank 2 |
| 1D | Injector bank 3 |
| 1E | Injector bank 4 |
| 1F | Ignition output 4 |
| 1G | Ignition output 3 |
| 1H | Ignition output 2 |
| 1J | Ignition output 1 |
| 1K | Ignition earth |
| 2A | Map switching input |
| 2B | Air temperature |
| 2C | Coolant temperature |
| 2D | Throttle position |
| 2E | MAP signal |
| 2F | Oxygen sensor 1 |
| 2G | Oxygen sensor 2 |
| 2H | 5 V reference |
| 2J | Main relay output |
| 2K | Output 2 (PWM capable) |
| 3A | ECU earth |
| 3B | 12 V supply |
| 3C | Crank sensor earth and shielding |
| 3D | Crank sensor signal |
| 3E | Cam / road speed signal |
| 3F | Serial ground |
| 3G | Serial receive |
| 3H | Serial transmit |
| 3J | Output 1 |
| 3K | Tachometer |
Confirm the exact ECU, hardware revision and connector orientation before wiring. Configurable functions and electrical limits are model-dependent; consult the linked original diagrams.