Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Haltech produces programmable universal wire-in ECUs and vehicle-specific kits. Record the exact ECU, part number and harness before selecting wiring. Haltech buyer's guide.

Haltech Nexus S series ECUs
Nexus S-series promotional image: Haltech. Permission to republish confirmed by the user.

Models and families

  • Nexus: T1, T2, S2, S3, R3 and R5. Rebel K and Rebel JZ are engine-specific ECU and terminated-harness kits. R3 and R5 combine engine control with power distribution. Manufacturer comparison.
  • Elite: 550, 750, 950, 1000, 1500, 2000, 2500 and 2500T. Downloads also identify Elite Falcon, VMS/VMST and REM application-specific units. Haltech downloads.
  • Platinum: Sprint 500, Sprint RE, Sport 1000, Sport 2000 and vehicle-specific Pro plug-ins. Platinum Interceptor is a piggyback controller, included here for identification rather than as a standalone ECU. Discontinued products.
  • Earlier: E6, E6A, E6GM, E6GMX, E6H, E6K, E6M, E6S, E6X, E8 and E11V2; F3, F7, F9, F10 and F10X. F-series includes fuel controllers; verify ignition capability for the individual unit. IG4 and IG5 are historic ignition controllers. Discontinued products.

This is a documented model index; limited-production and regional variants may be absent.

Example pinout: Elite 1500 connector A, 34-way

Numbering as viewed into the ECU header; the mating connector contact face is a mirror view. Confirm molded cavity numbers. This is specific to Elite 1500, not an Elite 2500 pinout. Haltech 34-pin table; connector and wiring documentation.

PinFunction
1DPO 2
2AVI 4
3–6Ignition 1–4
7–8Not assigned
9+5 V sensor supply
10–11Battery ground
12+8 V sensor supply
1312 V ignition input
14AVI 10 (TPS)
15AVI 9 (MAP)
16AVI 2
17AVI 3
18DPO 1
19–22Injector 1–4
23DPO 3
24DPO 5 / fuel pump trigger
25DPO 6 / engine control relay
26ECU injector power input
27–30Not assigned
31–34Stepper 1 phases 1–4 / DPO

A26 injector power is required for ECU operation. Confirm the 26-way B connector, driver limits, relay circuits and configured functions in the manufacturer documentation.

Further documentation

Sources reviewed 17 November 2026.