Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

MaxxECU produces programmable standalone engine management systems configured with MTune. Product families include universal and vehicle-specific plug-in installations.

Models

  • MINI, STREET, SPORT, RACE, RACE H2O and PRO.
  • GEN2 TRACK and GEN2 RACE: newer generation.
  • V1: earlier generation, still included in the manufacturer's GEN1 wiring reference.

The manufacturer’s comparison describes supported features; GEN2 RACE product page includes product photographs. Do not assume connectors or capabilities match across versions.

GEN2 RACE MX1 pinout

Connector 1 (MX1), GEN2 RACE only. Pin numbers are the manufacturer's numbers; consult its connector drawing for orientation. Engine ground goes to the cylinder head; sensor ground must not be connected to engine ground. Manufacturer's full GEN2 pinouts and limitations

PinFunction
1–4Ignition 1–4 respectively
5–8GP outputs 1–4 (ground) respectively
9Engine ground
10Digital/VR 1 signal +
11Digital/VR 1 signal −
12Digital/VR 1 power supply
13Digital/VR 1 shield
14Sensor ground
15CAN L
16CAN H
17GP output 5 (ground)
18Digital/VR 2 signal +
19Digital/VR 2 signal −
20Digital/VR 2 power supply
21Digital/VR 2 shield
225 V supply
23Digital/VR 3 signal +
24Digital/VR 4 signal +
2512 V supply 1, main ECU supply
26–30Analogue inputs 1–5 respectively
31–34Injectors 1–4 respectively

For GEN2 RACE MX2, MX3, MX4 and GEN2 TRACK MX3, use the full linked table. The GEN1 connector tables cover STREET/SPORT/V1/RACE/PRO; pin functions differ. Revision-specific wiring downloads

Confirm the exact ECU, hardware revision and connector orientation before wiring. Configurable functions and electrical limits are model-dependent; consult the linked original diagrams.