Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 6

Removed text is struck through; added text is highlighted.

Omex 600 series. Photo: Omex Technology; source: Omex engine management. Reproduced with permission.Earlier model: 700Individual model references150 — limited information100 (ignition only)200 (ignition only)500550600710

Omex Technology produces programmable engine management. Its manufacturer page identifies the 600 series for four-cylinder fuel and ignition applications with fixed or two-stage cams, and the 710 series for many engine configurations up to 12 cylinders. Omex engine management and product photographs

Models and earlier systems

600 series: four-cylinder fuel and ignition control.710 series: fuel and ignition control for configurations up to 12 cylinders.Earlier and related controllers: 100, 150, 200, 500, 550 and 700 are listed alongside 600 and 710 in AiM's historical GEMS/Omex communications list. The 200 is an ignition controller; do not assume every historical number is a full fuel-and-ignition standalone ECU. EFI Parts diagrams and manuals

Historic coverage is not necessarily exhaustive. Identify the exact model and hardware before selecting a diagram; 600 and 710 pin assignments are different.

Omex 600 connector pinout

Selected complete listed functions from OMEM600 installation manual 2v20, section 5.3. The manual depicts the connector from the wiring-loom side; consult its diagram and check terminal numbering before wiring. Blank pins in the source are omitted and should not be treated as available. Configurable auxiliary functions depend on setup. Omex 600 installation manual, pages 39–40

PinFunction1AIgnition 12AAux out 43AIdle 44ABattery power5AChassis earth 16ASensor ground7ACrank sensor8ATiming ground9ACoolant temperature sensor10AAux in 112AIgnition 21BInjection 12BInjection 23BIdle 34BAux out 15BFuel pump6BMAP sensor7BChassis earth 28BShift light9BAir temperature sensor11BAux in 212BAux out 22CIdle 23CIdle 14CAux out 36CRadiator fan relay7COxygen sensor8CThrottle position sensor9C5 V out10CRoad speed sensor11CAux in 312CTacho

Other wiring resources

Omex 710 hardware manual 2v11: connector pins, page 66Omex 200, 500, 600 and 710 manualsOmex ECU product support

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Omex standalone ECUs

Omex Technology produces programmable engine management. Its manufacturer page identifies the 600 series for four-cylinder fuel and ignition applications with fixed or two-stage cams, and the 710 series for many engine configurations up to 12 cylinders. Omex engine management and product photographs

Models and earlier systems

  • 600 series: four-cylinder fuel and ignition control.
  • 710 series: fuel and ignition control for configurations up to 12 cylinders.
  • Earlier and related controllers: 100, 150, 200, 500, 550 and 700 are listed alongside 600 and 710 in AiM's historical GEMS/Omex communications list. The 200 is an ignition controller; do not assume every historical number is a full fuel-and-ignition standalone ECU. EFI Parts diagrams and manuals

Historic coverage is not necessarily exhaustive. Identify the exact model and hardware before selecting a diagram; 600 and 710 pin assignments are different.

Omex 600 connector pinout

Selected complete listed functions from OMEM600 installation manual 2v20, section 5.3. The manual depicts the connector from the wiring-loom side; consult its diagram and check terminal numbering before wiring. Blank pins in the source are omitted and should not be treated as available. Configurable auxiliary functions depend on setup. Omex 600 installation manual, pages 39–40

PinFunction
1AIgnition 1
2AAux out 4
3AIdle 4
4ABattery power
5AChassis earth 1
6ASensor ground
7ACrank sensor
8ATiming ground
9ACoolant temperature sensor
10AAux in 1
12AIgnition 2
1BInjection 1
2BInjection 2
3BIdle 3
4BAux out 1
5BFuel pump
6BMAP sensor
7BChassis earth 2
8BShift light
9BAir temperature sensor
11BAux in 2
12BAux out 2
2CIdle 2
3CIdle 1
4CAux out 3
6CRadiator fan relay
7COxygen sensor
8CThrottle position sensor
9C5 V out
10CRoad speed sensor
11CAux in 3
12CTacho

Other wiring resources

Revision 6: Omex standalone ECUs
Omex 600 series engine management unit
Omex 600 series. Photo: Omex Technology; source: Omex engine management. Reproduced with permission.

Earlier model: 700

Individual model references

Omex Technology produces programmable engine management. Its manufacturer page identifies the 600 series for four-cylinder fuel and ignition applications with fixed or two-stage cams, and the 710 series for many engine configurations up to 12 cylinders. Omex engine management and product photographs

Models and earlier systems

  • 600 series: four-cylinder fuel and ignition control.
  • 710 series: fuel and ignition control for configurations up to 12 cylinders.
  • Earlier and related controllers: 100, 150, 200, 500, 550 and 700 are listed alongside 600 and 710 in AiM's historical GEMS/Omex communications list. The 200 is an ignition controller; do not assume every historical number is a full fuel-and-ignition standalone ECU. EFI Parts diagrams and manuals

Historic coverage is not necessarily exhaustive. Identify the exact model and hardware before selecting a diagram; 600 and 710 pin assignments are different.

Omex 600 connector pinout

Selected complete listed functions from OMEM600 installation manual 2v20, section 5.3. The manual depicts the connector from the wiring-loom side; consult its diagram and check terminal numbering before wiring. Blank pins in the source are omitted and should not be treated as available. Configurable auxiliary functions depend on setup. Omex 600 installation manual, pages 39–40

PinFunction
1AIgnition 1
2AAux out 4
3AIdle 4
4ABattery power
5AChassis earth 1
6ASensor ground
7ACrank sensor
8ATiming ground
9ACoolant temperature sensor
10AAux in 1
12AIgnition 2
1BInjection 1
2BInjection 2
3BIdle 3
4BAux out 1
5BFuel pump
6BMAP sensor
7BChassis earth 2
8BShift light
9BAir temperature sensor
11BAux in 2
12BAux out 2
2CIdle 2
3CIdle 1
4CAux out 3
6CRadiator fan relay
7COxygen sensor
8CThrottle position sensor
9C5 V out
10CRoad speed sensor
11CAux in 3
12CTacho

Other wiring resources