Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Bosch DCU dosing control
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Identity and evidence

Alientech previously identified DCU15 as a urea dosing unit with an ST10C167 and boot access, but its archive page now returns 404. Dimsport independently lists a DAF AdBlue DCU15 with ST10C167; its broader compatibility list also includes other ST10 parts, so the processor should not be assumed for every DCU15. The catalogue records Bosch 0281020186 and GP572 software identifiers; these are identification leads rather than proof of fitment.

Open the catalogue identity for its recorded identifiers and applications. The catalogue label is an identification lead; confirm the physical part and software before assuming compatibility.

Identification photograph

Bosch DCU15-4.5 ECU
DCU15-4.5. Photo: flexparts24 on eBay (used with permission).

System context

For the difference between the dosing controller, supply pump and dosing module, see Bosch DCU dosing control. Tool-reported microcontrollers are vendor identifications; no firmware or chip marking was examined for this entry.

Sources