Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Car makes
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Mazda

Changes from revision 1 to revision 6

Removed text is struck through; added text is highlighted.

Country of origin: Japan. Part of Car makes and the history of the motor car.

History and development

Mazda's roots go back to Toyo Cork Kogyo in Hiroshima in 1920. The company moved into vehicle manufacture and became known for small cars, sports cars and rotary-engine development. Wikipedia: Mazda history.

Mazda used the Wankel rotary engine in a number of production cars. Its MX-5 takes a different approach as a lightweight front-engined, rear-wheel-drive roadster.

A Mazda MX-5 roadster. Photo: 根川大橋 (Negawa Ohashi), Wikimedia Commons, CC BY-SA 4.0; resized and re-encoded.

Selected cars and engines

Examples are selected rather than a complete production list. Engine and equipment specifications can vary with year and market.

CarWhy it mattersEvidenceMX-5 / MiataThe roadster has appeared in several generations with different four-cylinder engines.Model referenceMX-5 2.0, specified 2016–2018 carsAn Edelbrock E-Force kit uses Eaton TVS R900; the referenced fitment is aftermarket, not original factory equipment.Eaton fitment guideRX-7A rotary-engined sports-car family; the third-generation car used sequential turbocharging.Model referenceRX-8A later four-seat sports car powered by a naturally aspirated rotary engine.Model reference

More models and representative enginesThese are specific examples rather than every engine offered. Equipment, output and capacity can change with model year and market; identify the exact vehicle before ordering parts.An RX-7 FD engine bay showing the 13B rotary engine. Photo: TTTNIS, Wikimedia Commons, CC0; resized and re-encoded.Model and versionEngine or powertrainEvidenceRX-7 FDA 1.3-litre 13B two-rotor Wankel engine with sequential twin turbochargers.Manufacturer or technical sourceRX-8The 1,308 cc RENESIS two-rotor engine was naturally aspirated in the production RX-8.Manufacturer or technical sourceMX-5 NB 1.8A 1.8-litre naturally aspirated inline-four in the specified second-generation roadster; 1.6-litre versions also existed.Manufacturer or technical sourceMazda3 MPS2.3-litre DISI turbocharged petrol inline-four in the MPS performance hatchback.Manufacturer or technical source

Identifying a car and engine

Use the VIN, market, model year and engine code when researching servicing, tuning or parts. A model badge may cover naturally aspirated, turbocharged, supercharged, hybrid or electric versions depending on the particular vehicle. Factory fitment and aftermarket conversions are distinguished in the linked guides.

Sources and related reading

Wikipedia: Mazda — marque history and further references.Tuning Wiki: illustrated turbocharged-car timeline.Tuning Wiki: supercharger types and Eaton guides.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Mazda: history and cars

Country of origin: Japan. Part of Car makes and the history of the motor car.

History and development

Mazda's roots go back to Toyo Cork Kogyo in Hiroshima in 1920. The company moved into vehicle manufacture and became known for small cars, sports cars and rotary-engine development. Wikipedia: Mazda history.

Mazda used the Wankel rotary engine in a number of production cars. Its MX-5 takes a different approach as a lightweight front-engined, rear-wheel-drive roadster.

Selected cars and engines

Examples are selected rather than a complete production list. Engine and equipment specifications can vary with year and market.

CarWhy it mattersEvidence
MX-5 / MiataThe roadster has appeared in several generations with different four-cylinder engines.Model reference
MX-5 2.0, specified 2016–2018 carsAn Edelbrock E-Force kit uses Eaton TVS R900; the referenced fitment is aftermarket, not original factory equipment.Eaton fitment guide
RX-7A rotary-engined sports-car family; the third-generation car used sequential turbocharging.Model reference
RX-8A later four-seat sports car powered by a naturally aspirated rotary engine.Model reference

Identifying a car and engine

Use the VIN, market, model year and engine code when researching servicing, tuning or parts. A model badge may cover naturally aspirated, turbocharged, supercharged, hybrid or electric versions depending on the particular vehicle. Factory fitment and aftermarket conversions are distinguished in the linked guides.

Sources and related reading

Revision 6: Mazda: history and cars

Country of origin: Japan. Part of Car makes and the history of the motor car.

History and development

Mazda's roots go back to Toyo Cork Kogyo in Hiroshima in 1920. The company moved into vehicle manufacture and became known for small cars, sports cars and rotary-engine development. Wikipedia: Mazda history.

Mazda used the Wankel rotary engine in a number of production cars. Its MX-5 takes a different approach as a lightweight front-engined, rear-wheel-drive roadster.

A Mazda MX-5 roadster.
A Mazda MX-5 roadster. Photo: 根川大橋 (Negawa Ohashi), Wikimedia Commons, CC BY-SA 4.0; resized and re-encoded.

Selected cars and engines

Examples are selected rather than a complete production list. Engine and equipment specifications can vary with year and market.

CarWhy it mattersEvidence
MX-5 / MiataThe roadster has appeared in several generations with different four-cylinder engines.Model reference
MX-5 2.0, specified 2016–2018 carsAn Edelbrock E-Force kit uses Eaton TVS R900; the referenced fitment is aftermarket, not original factory equipment.Eaton fitment guide
RX-7A rotary-engined sports-car family; the third-generation car used sequential turbocharging.Model reference
RX-8A later four-seat sports car powered by a naturally aspirated rotary engine.Model reference

More models and representative engines

These are specific examples rather than every engine offered. Equipment, output and capacity can change with model year and market; identify the exact vehicle before ordering parts.

An RX-7 FD engine bay showing the 13B rotary engine.
An RX-7 FD engine bay showing the 13B rotary engine. Photo: TTTNIS, Wikimedia Commons, CC0; resized and re-encoded.
Model and versionEngine or powertrainEvidence
RX-7 FDA 1.3-litre 13B two-rotor Wankel engine with sequential twin turbochargers.Manufacturer or technical source
RX-8The 1,308 cc RENESIS two-rotor engine was naturally aspirated in the production RX-8.Manufacturer or technical source
MX-5 NB 1.8A 1.8-litre naturally aspirated inline-four in the specified second-generation roadster; 1.6-litre versions also existed.Manufacturer or technical source
Mazda3 MPS2.3-litre DISI turbocharged petrol inline-four in the MPS performance hatchback.Manufacturer or technical source

Identifying a car and engine

Use the VIN, market, model year and engine code when researching servicing, tuning or parts. A model badge may cover naturally aspirated, turbocharged, supercharged, hybrid or electric versions depending on the particular vehicle. Factory fitment and aftermarket conversions are distinguished in the linked guides.

Sources and related reading