Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Supercharging
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Part of the supercharger types and Eaton model guide.

What it is

The R1900 displaces a nominal 1.9 litres per rotor revolution. Eaton describes a high-performance four-lobe TVS design; GM's LSA V8 provides well-documented factory examples.

SpecificationDetailRotor familyTVS R-series Roots-type; four-lobe, 160-degree twistNominal supercharger displacement1,900 cm³ = 1.900 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidenceCadillac CTS-V, 2009 model year6.2 L LSA V8Factory 1.9-litre Eaton TVS unit. Lingenfelter identifies the CTS-V LSA as TVS1900 and GM documents the LSA engine.Lingenfelter LSA instructions; GM Performance catalogue Chevrolet Camaro ZL1, 2012–20146.2 L LSA V8GM lists this factory LSA with a 1.9-litre supercharger; the CTS-V and Camaro charge-cooler arrangements differ.GM Performance catalogue Jaguar F-Type supercharged V8 (X152) and selected Range Rover V8s, 2014–20205.0 L supercharged V8Factory TVS1900 on the specific applications listed by the rebuild specialist; check the exact OE part number.High Speed Lab application and repair information

Design and application

R1900 rotor displacement is slightly larger than the M112's nominal 1.835 L/rev, but the TVS rotor and port design are different. The GM LSA unit, Jaguar applications and aftermarket housings cannot be assumed to share mounts or coolers.

Identification, maintenance and upgrades

Inspect charge-cooler seals and coolant circuit, input drive, belt and bypass. Compare the exact casting, inlet, lid and pulley offset when sourcing an LSA assembly; GM describes differences between Cadillac and Camaro charge-cooler configurations.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources

Eaton R1900 product information. Accessed 2026-11-14. Lingenfelter CTS-V LSA TVS1900 instructions. Accessed 2026-11-14. GM Performance: LSA, CTS-V and 2012–14 Camaro ZL1. Accessed 2026-11-14. High Speed Lab: Jaguar F-Type and Range Rover 5.0 TVS1900 applications. Accessed 2026-11-14.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Eaton TVS R1900 supercharger

Part of the supercharger types and Eaton model guide.

What it is

The R1900 displaces a nominal 1.9 litres per rotor revolution. Eaton describes a high-performance four-lobe TVS design; GM's LSA V8 provides well-documented factory examples.

SpecificationDetail
Rotor familyTVS R-series Roots-type; four-lobe, 160-degree twist
Nominal supercharger displacement1,900 cm³ = 1.900 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Cadillac CTS-V, 2009 model year6.2 L LSA V8Factory 1.9-litre Eaton TVS unit. Lingenfelter identifies the CTS-V LSA as TVS1900 and GM documents the LSA engine.Lingenfelter LSA instructions; GM Performance catalogue
Chevrolet Camaro ZL1, 2012–20146.2 L LSA V8GM lists this factory LSA with a 1.9-litre supercharger; the CTS-V and Camaro charge-cooler arrangements differ.GM Performance catalogue
Jaguar F-Type supercharged V8 (X152) and selected Range Rover V8s, 2014–20205.0 L supercharged V8Factory TVS1900 on the specific applications listed by the rebuild specialist; check the exact OE part number.High Speed Lab application and repair information

Design and application

R1900 rotor displacement is slightly larger than the M112's nominal 1.835 L/rev, but the TVS rotor and port design are different. The GM LSA unit, Jaguar applications and aftermarket housings cannot be assumed to share mounts or coolers.

Identification, maintenance and upgrades

Inspect charge-cooler seals and coolant circuit, input drive, belt and bypass. Compare the exact casting, inlet, lid and pulley offset when sourcing an LSA assembly; GM describes differences between Cadillac and Camaro charge-cooler configurations.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources

Revision 1: Eaton TVS R1900 supercharger

Part of the supercharger types and Eaton model guide.

What it is

The R1900 displaces a nominal 1.9 litres per rotor revolution. Eaton describes a high-performance four-lobe TVS design; GM's LSA V8 provides well-documented factory examples.

SpecificationDetail
Rotor familyTVS R-series Roots-type; four-lobe, 160-degree twist
Nominal supercharger displacement1,900 cm³ = 1.900 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Cadillac CTS-V, 2009 model year6.2 L LSA V8Factory 1.9-litre Eaton TVS unit. Lingenfelter identifies the CTS-V LSA as TVS1900 and GM documents the LSA engine.Lingenfelter LSA instructions; GM Performance catalogue
Chevrolet Camaro ZL1, 2012–20146.2 L LSA V8GM lists this factory LSA with a 1.9-litre supercharger; the CTS-V and Camaro charge-cooler arrangements differ.GM Performance catalogue
Jaguar F-Type supercharged V8 (X152) and selected Range Rover V8s, 2014–20205.0 L supercharged V8Factory TVS1900 on the specific applications listed by the rebuild specialist; check the exact OE part number.High Speed Lab application and repair information

Design and application

R1900 rotor displacement is slightly larger than the M112's nominal 1.835 L/rev, but the TVS rotor and port design are different. The GM LSA unit, Jaguar applications and aftermarket housings cannot be assumed to share mounts or coolers.

Identification, maintenance and upgrades

Inspect charge-cooler seals and coolant circuit, input drive, belt and bypass. Compare the exact casting, inlet, lid and pulley offset when sourcing an LSA assembly; GM describes differences between Cadillac and Camaro charge-cooler configurations.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources