Page organisation in this revision
- Page type
- Technical article
- Subject
- Supercharging
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
Part of the supercharger types and Eaton model guide.
What it is
The M122 is a nominal 122-cubic-inch, approximately 2.0-litre-per-revolution Roots-type unit. It was fitted to the earlier modern Shelby GT500's 5.4-litre V8; later GT500 engines used a different TVS design.
SpecificationDetailRotor familyM-series Roots-type, distinct from TVSNominal supercharger displacement122 in³ ≈ 1.999 L / rotor revolution
Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.
Cars, engines and examples
These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.
Vehicle and periodEngine displacement and typeInstallation and identificationEvidenceFord Shelby GT500, 2007–20125.4 L Modular DOHC V8Factory M122. VMP identifies the 2007–2012 stock unit; Ford identifies the 5.4-litre engine.VMP stock M122 application; Ford history
Design and application
The M122 uses the older M-series label rather than the later TVS designation. Ford's 2013 GT500 changed to a 5.8-litre V8 with an Eaton TVS 2300, so the name GT500 alone does not identify the blower. A rotor size is not an adapter, calibration or complete kit.
Identification, maintenance and upgrades
Confirm year, casting, mounting, throttle-body position, bypass and drive offset. Inspect the input drive, bearings, cooling and bypass. Consider fuel, ignition, intake temperature, belt wrap and maximum rotor speed together when considering an upgrade.
Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.
Sources
VMP: 2007–2012 GT500 factory M122. Accessed 2026-11-14.
Ford engine history: Modular V8 applications. Accessed 2026-11-14.
Ford 2013 GT500 supplement: 5.8-litre and TVS 2300. Accessed 2026-11-14.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Eaton M122 supercharger
Part of the supercharger types and Eaton model guide.
What it is
The M122 is a nominal 122-cubic-inch, approximately 2.0-litre-per-revolution Roots-type unit. It was fitted to the earlier modern Shelby GT500's 5.4-litre V8; later GT500 engines used a different TVS design.
| Specification | Detail |
|---|
| Rotor family | M-series Roots-type, distinct from TVS |
|---|
| Nominal supercharger displacement | 122 in³ ≈ 1.999 L / rotor revolution |
|---|
Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.
Cars, engines and examples
These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.
| Vehicle and period | Engine displacement and type | Installation and identification | Evidence |
|---|
| Ford Shelby GT500, 2007–2012 | 5.4 L Modular DOHC V8 | Factory M122. VMP identifies the 2007–2012 stock unit; Ford identifies the 5.4-litre engine. | VMP stock M122 application; Ford history |
Design and application
The M122 uses the older M-series label rather than the later TVS designation. Ford's 2013 GT500 changed to a 5.8-litre V8 with an Eaton TVS 2300, so the name GT500 alone does not identify the blower. A rotor size is not an adapter, calibration or complete kit.
Identification, maintenance and upgrades
Confirm year, casting, mounting, throttle-body position, bypass and drive offset. Inspect the input drive, bearings, cooling and bypass. Consider fuel, ignition, intake temperature, belt wrap and maximum rotor speed together when considering an upgrade.
Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.
Sources
Revision 1: Eaton M122 supercharger
Part of the supercharger types and Eaton model guide.
What it is
The M122 is a nominal 122-cubic-inch, approximately 2.0-litre-per-revolution Roots-type unit. It was fitted to the earlier modern Shelby GT500's 5.4-litre V8; later GT500 engines used a different TVS design.
| Specification | Detail |
|---|
| Rotor family | M-series Roots-type, distinct from TVS |
|---|
| Nominal supercharger displacement | 122 in³ ≈ 1.999 L / rotor revolution |
|---|
Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.
Cars, engines and examples
These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.
| Vehicle and period | Engine displacement and type | Installation and identification | Evidence |
|---|
| Ford Shelby GT500, 2007–2012 | 5.4 L Modular DOHC V8 | Factory M122. VMP identifies the 2007–2012 stock unit; Ford identifies the 5.4-litre engine. | VMP stock M122 application; Ford history |
Design and application
The M122 uses the older M-series label rather than the later TVS designation. Ford's 2013 GT500 changed to a 5.8-litre V8 with an Eaton TVS 2300, so the name GT500 alone does not identify the blower. A rotor size is not an adapter, calibration or complete kit.
Identification, maintenance and upgrades
Confirm year, casting, mounting, throttle-body position, bypass and drive offset. Inspect the input drive, bearings, cooling and bypass. Consider fuel, ignition, intake temperature, belt wrap and maximum rotor speed together when considering an upgrade.
Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.
Sources