Part of the supercharger types and Eaton model guide.
What it is
The name M65 appears in research and parts listings for Eaton superchargers, including Mercedes M271 Kompressor applications. The precise relationship between the M65 trade designation, individual Mercedes part numbers and rotor swept volume needs confirmation from Eaton or a vehicle-specific specification.
| Specification | Detail |
|---|---|
| Rotor family | M65 is a designation used in service and parts listings; confirm the actual unit |
| Nominal supercharger displacement | Not independently established for the units described as M65 |
Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.
Cars, engines and examples
These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.
| Vehicle and period | Engine displacement and type | Installation and identification | Evidence |
|---|---|---|---|
| Mercedes-Benz C 180 Kompressor S203, specified M271.946 application | 1.8 L (1,796 cm³) M271.946 inline-four | A Mercedes specialist lists M65 against M271.946; a belt manufacturer's application catalogue links that engine to the C 180 Kompressor. This vehicle pairing is inferred from the two sources and requires part-number confirmation. | Classic-Deluxe; Roulunds catalogue |
Design and application
Some aftermarket listings use M45 and M65 inconsistently, and one pulley listing contains contradictory wording. Do not infer that the number 65 necessarily means 65 cubic inches, or that an M45 pulley, rotor pack or nose will fit. Compare the complete Mercedes and Eaton identification on the actual unit.
Identification, maintenance and upgrades
Before buying, record the engine code, VIN, casting and OE number, nose, pulley and bypass arrangement. Establish the particular unit's lubrication and rotor-speed specification before tuning or rebuilding it.
Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.
Sources
- Classic-Deluxe: M65 and M271.946 product identification. Accessed 2026-11-14.
- Roulunds vehicle and engine application catalogue. Accessed 2026-11-14.
- KONES research: an Eaton M65 used in a test installation. Accessed 2026-11-14.
- M271 pulley listing: example of inconsistent M45/M65 wording. Accessed 2026-11-14.