Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Bosch DCU dosing control
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

What DCU24 controls

The imported catalogue label BOSCH_DCU24_TC1724 corresponds to a Hyundai tool listing for an AdBlue dosing or aftertreatment controller. The evidence supports classifying it as a urea-dosing control module rather than the engine management ECU. The control unit manages the urea injection system alongside a separate engine controller; the dosing unit, the supply pump and the injector are different components.

Dimsport’s 2020 Race newsletter explicitly labels the Hyundai Bosch DCU24 TC1724 as ACM and lists the H350 2.5 CRDi, 110 kW. A cable supplier lists Hyundai DCU24 among AdBlue DCUs. ECUData describes a Hyundai DCU24 (DCU17PC42) software family as controlling urea injection in conjunction with an EDC or MD engine controller. These are tool and service descriptions, not a Bosch factory identification of every device carrying the name.

Are DCU24 and DCU17PC42 the same controller?

Conclusion: the names overlap for at least a documented software identification, and their programming documentation is consistent with related hardware. The evidence does not prove that the imported DCU24 record is identical to the separate DCU17PC42 model, or that the labels are interchangeable for every vehicle. They remain separate catalogue identities.

EvidenceWhat the source actually establishes
29610-3A150 / 10SW054870 / 1535R196ECUData labels a software category DCU24 (DCU17PC42) and gives this identifier set as an example. ECUfiles lists the same set under DCU17PC42 for a Kia Mohave; P-S-S lists 29610-3A150 / 10SW054870 / HMCP1535R196 as DCU17PC43 for a Mohave. These source descriptions conflict. Neither establishes the designation of the physical unit or ties the imported catalogue record to that part number.
29610-4A150 / 0281033325ECUfiles lists Hyundai H350 29610-4A150 with DCU17PC42 and software 10SW011340. Cartech pairs 29610-4A150 with Bosch 0281033325 in a product listing, which generically calls the part an engine ECU. These are possible identification leads; the listings do not establish that the unit also carries a DCU24 marking.
TC1724N and connectorFormulaFlash separately lists Hyundai H350 DCU24 and DCU17PC42 with TC1724N. A cable supplier describes one bench cable for Hyundai DCU24 and several PC42 applications. These are tool compatibility claims, not a photographed chip marking or an OEM interchange list.

The ECU Pinouts DCU24 page shows a 94-pin programming connection with the same power, ground and CAN positions as its Fiat/Renault/Mercedes DCU17PC42 page, but one GPT position differs. PCMflash’s PC42/PC43 manual shows three different programming connection variants, one matching the DCU24 page’s listed positions. The published variations are therefore compatible with overlap and are not, by themselves, proof of a different circuit board or of complete equivalence. Use the tool documentation for the exact unit rather than treating any one diagram as a universal pinout.

ECUData also has a separate category called DCU24 (DCU17PC43). This suggests that at least that supplier uses DCU24 as a broader software or tool grouping; it cannot be assumed to be an exclusive synonym for PC42. The sample part and software numbers above are not assigned to the imported DCU24 record without a matching source label. A Bosch or Hyundai part-to-model document, or a clearly photographed unit label and board tied to those identifiers, would resolve more of the identity question.

What the photographs show

An i800 owner’s photograph shows a Hyundai/Bosch dosing unit with a large 29610-4A350 sticker and Bosch 0 281 031 848 marking. A Hyundai parts supplier describes 29610-4A350 as a dosing control unit. The owner’s photo is useful evidence for that particular external label, but it does not visibly identify the unit as DCU24 or DCU17PC42, and it is not the 29610-3A150 example above. The photograph is linked at its source; its reproduction rights have not been established.

A seller’s listing for 29610-3A150 warns that its pictures are reference images, with some depicting a different numbered unit, so those pictures are not used as label evidence. No verifiable pair of board photographs, or Bosch/Hyundai document mapping the exact imported DCU24 label and DCU17PC42 to the same part, was found. The identity review remains open.

Identifying a unit

ECU Pinouts generically calls DCU24 an engine ECU and gives a 94-pin programming connection, but does not establish engine-management functions. Its description is less specific about function than the dosing and aftertreatment sources above. Match the actual label, part number, software and vehicle when identifying a controller; a shared programming connector or protocol does not establish hardware equivalence.

TC1724 or TC1724N is named by tool vendors. No firmware or physical unit was examined for this page, so the microcontroller marking and the precise identity of the imported catalogue record remain unconfirmed. For system operation see Bosch DCU dosing control and for the separate model see Bosch DCU17PC42.

Further identification conflict: A CarDamp file index calls a Kia Sportage controller with Kia 29610-2U500, Bosch 0281035845 and software 10SW041682 DCU17PC42. An OtoCikma parts listing uses the same Kia and Bosch part numbers but calls it DCU17PC43; an AutoECUFile index also lists Bosch 0281035845 under PC43 with different software. These are third-party attributions, not an OEM model cross-reference or verified board comparison. The catalogue retains its existing PC43 part association with this conflict flagged for review; no interchangeability is implied.

Sources