Distributor, not a rail
ECD-V is Denso's electronically controlled distributor diesel system. The 2000 manual covers ECD-V3, ECD-V3 (ROM), ECD-V4 and ECD-V5, and it describes them as control of a distributor-type pump. The September 2007 common-rail manual, document 00400534E, lists the same series as V3, V4 and V5, and says the control acts through VE distributor pumps. V3 and V5 are for passenger cars and RVs. V4 can also support small trucks.
The 2007 chart also marks an earlier ECD-V1. The written list of types in that manual, and the models in the 2000 manual, start at V3. V1 stays a mark on the chart.
The chart describes the world's first SPV, an electromagnetic spill valve, so that the quantity from each cylinder can be controlled, and it prints 60 MPa, 100 MPa and 130 MPa on this side of the family. It also names an inner-cam pumping mechanism and pilot injection. The three pressure maxima are recorded on common-rail diesel fuel systems. This copy does not show a clean column that ties each pressure to one V number.
Where common rail starts
Common rail in the same 2007 manual is a different system: a supply pump, a rail and injectors, with the engine ECU on Denso common-rail ECU. The manual dates the truck common rail to 1995 and the passenger-car HP2 system to 1999. An ECD-V file is the distributor controller. It is not a calibration for the common-rail ECU.
The gasoline engine ECU is on Denso petrol. ECD here means electronically controlled diesel.
Sources
- Denso, ECD-V series manual, 2000. ECD-V3, ECD-V3 (ROM), ECD-V4 and ECD-V5 as distributor-type systems. Mirror: ECD-V series.
- Denso, Common Rail System operation, document 00400534E, September 2007. V3 and V5 for passenger cars and RVs, V4 also for small trucks, and the chart pressures. Mirror: 00400534E.