Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- Bosch DCU dosing control
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
Identity and evidence
Alientech lists DCU15C167 as a urea dosing unit for the Iveco Vertis 90V18, 3.9 litre, 129 kW, with boot access. This is a separate catalogue record from DCU15; the similar name alone does not establish that the records are identical.
Open the catalogue identity for its recorded identifiers and applications. The catalogue label is an identification lead; confirm the physical part and software before assuming compatibility.
System context
For the difference between the dosing controller, supply pump and dosing module, see Bosch DCU dosing control. Tool-reported microcontrollers are vendor identifications; no firmware or chip marking was examined for this entry.
Sources
Alientech
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Bosch DCU15C167
Identity and evidence
Alientech lists DCU15C167 as a urea dosing unit for the Iveco Vertis 90V18, 3.9 litre, 129 kW, with boot access. This is a separate catalogue record from DCU15; the similar name alone does not establish that the records are identical.
Open the catalogue identity for its recorded identifiers and applications. The catalogue label is an identification lead; confirm the physical part and software before assuming compatibility.
System context
For the difference between the dosing controller, supply pump and dosing module, see Bosch DCU dosing control. Tool-reported microcontrollers are vendor identifications; no firmware or chip marking was examined for this entry.
Sources
Revision 2: Bosch DCU15C167
Identity and evidence
Alientech lists DCU15C167 as a urea dosing unit for the Iveco Vertis 90V18, 3.9 litre, 129 kW, with boot access. This is a separate catalogue record from DCU15; the similar name alone does not establish that the records are identical.
Open the catalogue identity for its recorded identifiers and applications. The catalogue label is an identification lead; confirm the physical part and software before assuming compatibility.
System context
For the difference between the dosing controller, supply pump and dosing module, see Bosch DCU dosing control. Tool-reported microcontrollers are vendor identifications; no firmware or chip marking was examined for this entry.
Sources