Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Siemens and Continental diesel
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

PPD 1.1 is the injector unit

Volkswagen Self-Study Programme 352, March 2005, uses PPD 1.1 as the version name of a pump-injector unit, not as the name of an engine controller. The unit is the piezo-valve development of the earlier solenoid pump-injector, PDE-P2. It was developed with Siemens VDO Automotive. The mounting and the two-bolt fixing are carried over so the engine design does not change. The programme says the new units go into the new 2.0-litre 125 kW four-valve TDI, and later into further four-valve TDI engines.

The piezo valve is there so the pilot, the main and the post injection can be shaped more freely than with the solenoid unit. Volkswagen Mechatronic, the production company named in the programme, was founded with Siemens VDO for that unit, at Stollberg in Saxony. The programme is the description of the injector. The workshop literature for the engine is the procedure for pressures, coding and replacement.

The same letters on a controller

File catalogues and ECU sellers use PPD 1.1, PPD 1.2, PPD 1.3 and PPD 1.5 as the name of a Siemens engine controller on Volkswagen Group pump-nozzle diesels, often with Volkswagen part numbers in the 03G 906 018 range. That is a second use of the letters. SSP 352 does not call the control unit PPD. A controller identified that way still has to be matched by its own hardware and software numbers. The injector version and the controller version are allowed to carry related numbers without being the same part.

Bosch EDC16 also controlled Volkswagen pump-nozzle engines. A 2.0 TDI of these years is identified from the controller label. Pump-nozzle and common rail are different fuel systems: the common-rail account is on common-rail diesel fuel systems, and the common-rail Siemens controller in this group is PCR 2.1 or a SID, depending on the label.

Sources

  • Volkswagen Self-Study Programme 352, March 2005, Pumpe-Düse-Einheit mit Piezo-Ventil. PPD 1.1 as the piezo unit developed with Siemens VDO for the 2.0-litre 125 kW four-valve TDI. Catalogue extract: SSP 352 record. Accessed 2026-11-13.
  • ECUDB, PPD Maps support notes. PPD1.1, 1.2, 1.3 and 1.5 used there as controller-file names, with Volkswagen and Audi numbers in the 03G 906 018 family, and an explicit warning that Bosch EDC16 was used on similar cars. PPD Maps. Accessed 2026-11-13.