Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
What this page covers
Sagem supplied the petrol engine-control units on a large part of the Renault range, and on a number of Peugeot and Citroën engines. This page indexes the families written up here. A Sagem label on an instrument cluster, a body computer or a diesel controller is not one of these ECUs. Lucas GEMS, the Rover V8 controller developed with SAGEM, is a different system and is documented on Lucas GEMS.
The families
Sagem Safir. The earlier Renault multipoint controller, used on Clio, Twingo and Kangoo engines such as the D7F. Semi-sequential injection and a wasted-spark coil. Published descriptions disagree about which numeral is the 35-pin unit and which is the 55-pin unit.
Sagem S2000. Sequential injection. On the Renault Laguna installation it is a 112-track ECU with a motorised throttle. The 1999 Citroën description is still a cable throttle and a manifold-pressure calculation. S2000 PM1, from 2003, is the Citroën TU and EW version with a torque structure and a motorised throttle.
Sagem S3000. The later Renault petrol controller: 128 tracks, sequential injection, a coil for each cylinder, a motorised throttle, and a torque structure that also accepts requests from the stability control and the automatic gearbox. The Renault fault-finding document used here covers Mégane II phase 2 and Scénic II phase 2.
Sagem SL96. A Sagem petrol ECU identified on Citroën Xantia and Peugeot 306 and 406. It is not the Renault Safir.
Who built them
Johnson Controls bought Sagem's automotive electronics business in 2001. The European customers named for the fuel injectors and engine controllers were the French manufacturers. In January 2005 Johnson Controls agreed to sell that engine-electronics business, including the engine-management systems and control units, to Valeo. An ECU marked Sagem, Johnson Controls or Valeo can be the same hardware generation. The type on the label, Safir, S2000 or S3000, is the identification. The company name on the case is not.
What else was on these Renaults
A 2007 Renault injection-ECU tool manual lists the petrol controllers it could address alongside Safir. They are not Sagem units: Siemens Fenix 3B, Siemens Fenix 5, Siemens Sirius 32, Bosch Motronic MP7.0, and Magneti Marelli IAW 06R and IAW 8R.30. The Laguna workshop text puts a 128-track Bosch ME7.4.6 on the V6, next to the Sagem S2000 on the four-cylinder engines. The Kangoo text allows a 35-pin or 55-pin Magneti Marelli in place of the Sagem unit, and a 55-pin Siemens Fenix 5 on another engine in the same manual. Read the label. The car line does not decide the supplier.
Renault diesels of the same years are Bosch, including EDC16C3 on the Mégane II 1.9 dCi. Diagnostic access for the later Sagem petrol ECUs is Renault CLIP, described on Renault CLIP and the Alliance diagnostic tool.
Sources
Johnson Controls, agreement to sell the engine electronics business to Valeo, 10 January 2005, US SEC exhibit. The 2001 Sagem acquisition and the scope of the business. SEC filing.
WardsAuto, Johnson Controls acquisition of Sagem automotive electronics, 2001. French manufacturers as the European customers for the injectors and controllers.
Renault Laguna workshop particulars for Sagem S2000, as republished by Laguna Notice. Accessed 2026-11-13.
Renault MR-366, petrol injection fault finding, Sagem S3000, program AD, Vdiag 4C and 54.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Sagem
What this page covers
Sagem supplied the petrol engine-control units on a large part of the Renault range, and on a number of Peugeot and Citroën engines. This page indexes the families written up here. A Sagem label on an instrument cluster, a body computer or a diesel controller is not one of these ECUs. Lucas GEMS, the Rover V8 controller developed with SAGEM, is a different system and is documented on Lucas GEMS.
The families
- Sagem Safir. The earlier Renault multipoint controller, used on Clio, Twingo and Kangoo engines such as the D7F. Semi-sequential injection and a wasted-spark coil. Published descriptions disagree about which numeral is the 35-pin unit and which is the 55-pin unit.
- Sagem S2000. Sequential injection. On the Renault Laguna installation it is a 112-track ECU with a motorised throttle. The 1999 Citroën description is still a cable throttle and a manifold-pressure calculation. S2000 PM1, from 2003, is the Citroën TU and EW version with a torque structure and a motorised throttle.
- Sagem S3000. The later Renault petrol controller: 128 tracks, sequential injection, a coil for each cylinder, a motorised throttle, and a torque structure that also accepts requests from the stability control and the automatic gearbox. The Renault fault-finding document used here covers Mégane II phase 2 and Scénic II phase 2.
- Sagem SL96. A Sagem petrol ECU identified on Citroën Xantia and Peugeot 306 and 406. It is not the Renault Safir.
Who built them
Johnson Controls bought Sagem's automotive electronics business in 2001. The European customers named for the fuel injectors and engine controllers were the French manufacturers. In January 2005 Johnson Controls agreed to sell that engine-electronics business, including the engine-management systems and control units, to Valeo. An ECU marked Sagem, Johnson Controls or Valeo can be the same hardware generation. The type on the label, Safir, S2000 or S3000, is the identification. The company name on the case is not.
What else was on these Renaults
A 2007 Renault injection-ECU tool manual lists the petrol controllers it could address alongside Safir. They are not Sagem units: Siemens Fenix 3B, Siemens Fenix 5, Siemens Sirius 32, Bosch Motronic MP7.0, and Magneti Marelli IAW 06R and IAW 8R.30. The Laguna workshop text puts a 128-track Bosch ME7.4.6 on the V6, next to the Sagem S2000 on the four-cylinder engines. The Kangoo text allows a 35-pin or 55-pin Magneti Marelli in place of the Sagem unit, and a 55-pin Siemens Fenix 5 on another engine in the same manual. Read the label. The car line does not decide the supplier.
Renault diesels of the same years are Bosch, including EDC16C3 on the Mégane II 1.9 dCi. Diagnostic access for the later Sagem petrol ECUs is Renault CLIP, described on Renault CLIP and the Alliance diagnostic tool.
Sources
- Johnson Controls, agreement to sell the engine electronics business to Valeo, 10 January 2005, US SEC exhibit. The 2001 Sagem acquisition and the scope of the business. SEC filing.
- WardsAuto, Johnson Controls acquisition of Sagem automotive electronics, 2001. French manufacturers as the European customers for the injectors and controllers.
- Renault Laguna workshop particulars for Sagem S2000, as republished by Laguna Notice. Accessed 2026-11-13.
- Renault MR-366, petrol injection fault finding, Sagem S3000, program AD, Vdiag 4C and 54.
Revision 1: Sagem
What this page covers
Sagem supplied the petrol engine-control units on a large part of the Renault range, and on a number of Peugeot and Citroën engines. This page indexes the families written up here. A Sagem label on an instrument cluster, a body computer or a diesel controller is not one of these ECUs. Lucas GEMS, the Rover V8 controller developed with SAGEM, is a different system and is documented on Lucas GEMS.
The families
- Sagem Safir. The earlier Renault multipoint controller, used on Clio, Twingo and Kangoo engines such as the D7F. Semi-sequential injection and a wasted-spark coil. Published descriptions disagree about which numeral is the 35-pin unit and which is the 55-pin unit.
- Sagem S2000. Sequential injection. On the Renault Laguna installation it is a 112-track ECU with a motorised throttle. The 1999 Citroën description is still a cable throttle and a manifold-pressure calculation. S2000 PM1, from 2003, is the Citroën TU and EW version with a torque structure and a motorised throttle.
- Sagem S3000. The later Renault petrol controller: 128 tracks, sequential injection, a coil for each cylinder, a motorised throttle, and a torque structure that also accepts requests from the stability control and the automatic gearbox. The Renault fault-finding document used here covers Mégane II phase 2 and Scénic II phase 2.
- Sagem SL96. A Sagem petrol ECU identified on Citroën Xantia and Peugeot 306 and 406. It is not the Renault Safir.
Who built them
Johnson Controls bought Sagem's automotive electronics business in 2001. The European customers named for the fuel injectors and engine controllers were the French manufacturers. In January 2005 Johnson Controls agreed to sell that engine-electronics business, including the engine-management systems and control units, to Valeo. An ECU marked Sagem, Johnson Controls or Valeo can be the same hardware generation. The type on the label, Safir, S2000 or S3000, is the identification. The company name on the case is not.
What else was on these Renaults
A 2007 Renault injection-ECU tool manual lists the petrol controllers it could address alongside Safir. They are not Sagem units: Siemens Fenix 3B, Siemens Fenix 5, Siemens Sirius 32, Bosch Motronic MP7.0, and Magneti Marelli IAW 06R and IAW 8R.30. The Laguna workshop text puts a 128-track Bosch ME7.4.6 on the V6, next to the Sagem S2000 on the four-cylinder engines. The Kangoo text allows a 35-pin or 55-pin Magneti Marelli in place of the Sagem unit, and a 55-pin Siemens Fenix 5 on another engine in the same manual. Read the label. The car line does not decide the supplier.
Renault diesels of the same years are Bosch, including EDC16C3 on the Mégane II 1.9 dCi. Diagnostic access for the later Sagem petrol ECUs is Renault CLIP, described on Renault CLIP and the Alliance diagnostic tool.
Sources
- Johnson Controls, agreement to sell the engine electronics business to Valeo, 10 January 2005, US SEC exhibit. The 2001 Sagem acquisition and the scope of the business. SEC filing.
- WardsAuto, Johnson Controls acquisition of Sagem automotive electronics, 2001. French manufacturers as the European customers for the injectors and controllers.
- Renault Laguna workshop particulars for Sagem S2000, as republished by Laguna Notice. Accessed 2026-11-13.
- Renault MR-366, petrol injection fault finding, Sagem S3000, program AD, Vdiag 4C and 54.