Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Flash & Device Programmers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Conitec

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Conitec GALEP-5. Image credit: Conitec Datensysteme. Image source.

EPROM and flash programmers

GALEP-5 is a pocket universal programmer from Conitec Datensysteme. Conitec lists a 48-pin ZIF socket with 48 pin drivers, power from USB, and an external supply only when a device draws more than the USB budget. The stated size is about 80 × 115 × 33 mm plus the socket, and the weight is about 185 g.

Each pin can supply a logic high from 1.2 V to 5.0 V, an input threshold, three programming voltages from 1.3 V to 25.0 V, pull-up and pull-down resistors, a clock, or ground. Low-voltage parts are listed down to 1.3 V. The internal computer is a 200 MIPS ARM9 with 64 MB of RAM, 8 MB of flash and an FPGA, running embedded Linux 2.6. DIL parts up to 48 pins fit the socket. Other packages use one adapter per package rather than one adapter per device. Conitec also describes JTAG programming and in-system signals taken from an adapter or from the ZIF socket.

Source: Conitec GALEP-5.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Conitec GALEP-5
Red Conitec GALEP-5 programmer with a 48-pin ZIF socket
Conitec GALEP-5. Image credit: Conitec Datensysteme. Image source.

EPROM and flash programmers

GALEP-5 is a pocket universal programmer from Conitec Datensysteme. Conitec lists a 48-pin ZIF socket with 48 pin drivers, power from USB, and an external supply only when a device draws more than the USB budget. The stated size is about 80 × 115 × 33 mm plus the socket, and the weight is about 185 g.

Each pin can supply a logic high from 1.2 V to 5.0 V, an input threshold, three programming voltages from 1.3 V to 25.0 V, pull-up and pull-down resistors, a clock, or ground. Low-voltage parts are listed down to 1.3 V. The internal computer is a 200 MIPS ARM9 with 64 MB of RAM, 8 MB of flash and an FPGA, running embedded Linux 2.6. DIL parts up to 48 pins fit the socket. Other packages use one adapter per package rather than one adapter per device. Conitec also describes JTAG programming and in-system signals taken from an adapter or from the ZIF socket.

Source: Conitec GALEP-5.

Revision 1: Conitec GALEP-5
Red Conitec GALEP-5 programmer with a 48-pin ZIF socket
Conitec GALEP-5. Image credit: Conitec Datensysteme. Image source.

EPROM and flash programmers

GALEP-5 is a pocket universal programmer from Conitec Datensysteme. Conitec lists a 48-pin ZIF socket with 48 pin drivers, power from USB, and an external supply only when a device draws more than the USB budget. The stated size is about 80 × 115 × 33 mm plus the socket, and the weight is about 185 g.

Each pin can supply a logic high from 1.2 V to 5.0 V, an input threshold, three programming voltages from 1.3 V to 25.0 V, pull-up and pull-down resistors, a clock, or ground. Low-voltage parts are listed down to 1.3 V. The internal computer is a 200 MIPS ARM9 with 64 MB of RAM, 8 MB of flash and an FPGA, running embedded Linux 2.6. DIL parts up to 48 pins fit the socket. Other packages use one adapter per package rather than one adapter per device. Conitec also describes JTAG programming and in-system signals taken from an adapter or from the ZIF socket.

Source: Conitec GALEP-5.