Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning Tools
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
Diagnostic tools, Flashing and tuning tools
Manufacturers
EFILive

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

EFILive FlashScan V3. Image credit: EFILive. Image source.

FlashScan is EFILive’s vehicle interface for scanning, data logging and calibration work on the controllers EFILive supports. The manufacturer says FlashScan V2 was retired from sale in November 2020. FlashScan V3 is the current interface. In the scan configuration it reads calibration data, reads and clears fault codes and logs data, either on its own or between a PC and the vehicle. Writing calibrations requires a tuning option. EFILive states that the GM and Dodge Cummins tuning options each ship with two VIN licences, and names supported groups as selected GM, Dodge Cummins and Cummins heavy-duty controllers.

AutoCal is a separate handheld the manufacturer describes for delivering a tuner’s calibrations to customers. Coverage and the software version required for a tuning option have to be checked on the current EFILive pages. This is not a general European bench programmer.

Sources

EFILive: FlashScanEFILive: FlashScan V3

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: EFILive FlashScan
EFILive FlashScan V3 handheld
EFILive FlashScan V3. Image credit: EFILive. Image source.

FlashScan is EFILive’s vehicle interface for scanning, data logging and calibration work on the controllers EFILive supports. The manufacturer says FlashScan V2 was retired from sale in November 2020. FlashScan V3 is the current interface. In the scan configuration it reads calibration data, reads and clears fault codes and logs data, either on its own or between a PC and the vehicle. Writing calibrations requires a tuning option. EFILive states that the GM and Dodge Cummins tuning options each ship with two VIN licences, and names supported groups as selected GM, Dodge Cummins and Cummins heavy-duty controllers.

AutoCal is a separate handheld the manufacturer describes for delivering a tuner’s calibrations to customers. Coverage and the software version required for a tuning option have to be checked on the current EFILive pages. This is not a general European bench programmer.

Sources

Revision 2: EFILive FlashScan
EFILive FlashScan V3 handheld
EFILive FlashScan V3. Image credit: EFILive. Image source.

FlashScan is EFILive’s vehicle interface for scanning, data logging and calibration work on the controllers EFILive supports. The manufacturer says FlashScan V2 was retired from sale in November 2020. FlashScan V3 is the current interface. In the scan configuration it reads calibration data, reads and clears fault codes and logs data, either on its own or between a PC and the vehicle. Writing calibrations requires a tuning option. EFILive states that the GM and Dodge Cummins tuning options each ship with two VIN licences, and names supported groups as selected GM, Dodge Cummins and Cummins heavy-duty controllers.

AutoCal is a separate handheld the manufacturer describes for delivering a tuner’s calibrations to customers. Coverage and the software version required for a tuning option have to be checked on the current EFILive pages. This is not a general European bench programmer.

Sources