Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning Tools
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
Flashing and tuning tools
Manufacturers
FG Technology

FG Technology EOBD2 is the company’s current programmer. The earlier equipment below is the line workshops often called Galletto, which is the founders’ family name. FG Technology’s own history does not use “Galletto 1260” as a model name.

Company sequence

FG Technology says it was founded in 1983 by the Galletto brothers. Its published sequence is:

  • 1986: Galmap, DOS software for graphic remapping.
  • 1989: Emur6 and then Emur7, static EPROM emulators. A company photograph is captioned as mapping a Lancia Delta Integrale control unit with Emur6.
  • 1992: a real-time EPROM emulator developed with the University of Ljubljana, followed by a real-time emulator called MultiRom.
  • 1996: the first tools made for chiptuning.
  • 2004: EOBD, which the company calls the ancestor of the current instrument.
  • 2008: EOBD2, the current tool. Later hardware is on the EOBD2 page, including Bench Plus in 2019 and Bench Ultra in 2023.

The Galletto name

Dealers, manuals and forum posts called the OBD interface Galletto. A French manual dated 2012 is titled for “EOBD2 Galletto 1260” and tells the user to open software named “EOBD2 1260 FG”. Period discussion also distinguishes a “Galletto 2” interface from a “Galletto 1260”. Those are trade names. They are not model names on the manufacturer’s history page, which calls the 2004 tool EOBD and the 2008 tool EOBD2.

Cables sold now as Galletto 1260 come from many sellers. Listings disagree about the circuit, and a familiar name does not show that a cable was built or licensed by FG Technology. The clone warning on the EOBD2 page applies. Ask FG Technology to confirm a serial number before treating used equipment as theirs.

Sources