Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning Tools
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
Diagnostic tools, Flashing and tuning tools
Manufacturers
EcuTek

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

EcuTek ProECU reprograms supported factory engine control units through the diagnostic connector. EcuTek describes it as a rewrite of the original control unit, not a piggyback module and not an aftermarket engine computer. Programming kits are supplied through an EcuTek master tuner. The kit needs a Windows laptop and a wired connection to the diagnostic socket. The publisher says the same kit can log data and can write ROM files supplied by the master tuner.

Supported vehicles change and are published by EcuTek. Older product notes covered selected Subaru, Mitsubishi, Mazda and Nissan control units. Use the current vehicle list rather than those notes. The programming kit and the tuner’s map-editing suite are different pieces of software.

Sources

EcuTek: programming kitEcuTek: ProECU software overview

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: EcuTek ProECU

EcuTek ProECU reprograms supported factory engine control units through the diagnostic connector. EcuTek describes it as a rewrite of the original control unit, not a piggyback module and not an aftermarket engine computer. Programming kits are supplied through an EcuTek master tuner. The kit needs a Windows laptop and a wired connection to the diagnostic socket. The publisher says the same kit can log data and can write ROM files supplied by the master tuner.

Supported vehicles change and are published by EcuTek. Older product notes covered selected Subaru, Mitsubishi, Mazda and Nissan control units. Use the current vehicle list rather than those notes. The programming kit and the tuner’s map-editing suite are different pieces of software.

Sources

Revision 1: EcuTek ProECU

EcuTek ProECU reprograms supported factory engine control units through the diagnostic connector. EcuTek describes it as a rewrite of the original control unit, not a piggyback module and not an aftermarket engine computer. Programming kits are supplied through an EcuTek master tuner. The kit needs a Windows laptop and a wired connection to the diagnostic socket. The publisher says the same kit can log data and can write ROM files supplied by the master tuner.

Supported vehicles change and are published by EcuTek. Older product notes covered selected Subaru, Mitsubishi, Mazda and Nissan control units. Use the current vehicle list rather than those notes. The programming kit and the tuner’s map-editing suite are different pieces of software.

Sources