Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning Tools
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
Flashing and tuning tools
Manufacturers
BitSoftware

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

BitBox is BitSoftware’s software for identifying, reading and writing internal flash in supported automotive and industrial control units. It is separate from BitEdit, which is an editor and does not communicate with a control unit.

BitSoftware says BitBox talks to a control unit over CAN or K-line through a J2534 PassThru adapter, or by Ethernet. The package is a Senselock USB dongle plus a shell and separately activated plugin modules. The program uses a client-server arrangement and needs an internet connection. Module activation is online. Coverage is the current car list, not the name of a controller family.

Sources

BitSoftware: BitBox.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: BitBox

BitBox is BitSoftware’s software for identifying, reading and writing internal flash in supported automotive and industrial control units. It is separate from BitEdit, which is an editor and does not communicate with a control unit.

BitSoftware says BitBox talks to a control unit over CAN or K-line through a J2534 PassThru adapter, or by Ethernet. The package is a Senselock USB dongle plus a shell and separately activated plugin modules. The program uses a client-server arrangement and needs an internet connection. Module activation is online. Coverage is the current car list, not the name of a controller family.

Sources

BitSoftware: BitBox.

Revision 1: BitBox

BitBox is BitSoftware’s software for identifying, reading and writing internal flash in supported automotive and industrial control units. It is separate from BitEdit, which is an editor and does not communicate with a control unit.

BitSoftware says BitBox talks to a control unit over CAN or K-line through a J2534 PassThru adapter, or by Ethernet. The package is a Senselock USB dongle plus a shell and separately activated plugin modules. The program uses a client-server arrangement and needs an internet connection. Module activation is online. Coverage is the current car list, not the name of a controller family.

Sources

BitSoftware: BitBox.