Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Car makes
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
JZR

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

JZR is a British kit-built three-wheeler in the style of the Morgan three-wheelers of the 1920s and 1930s. It has two wheels at the front and one driven rear wheel, and it is powered by a motorcycle engine that drives the rear wheel through the motorcycle's own gearbox and shaft drive. Most cars use a Honda CX500 or CX650 V-twin. The name comes from John Ziemba Restorations of Darwen, Lancashire. There is no evidence that JZR kits were made or sold in 2025–2026: the firm has no website and no recent press coverage. Cars remain in use and still appear at shows.

History and status

John Ziemba, a Morgan enthusiast, developed the JZR at his workshop in Nancy Street Yard, Darwen. Sources place its introduction between the late 1980s and 1990, the year Wikipedia gives for the start of marketing. About 320 of the original style were built up to 1998, according to the owners' club estimate. In 1998 UK kit sales stopped over an undisclosed legal matter, although a few kits were still exported. About two years later sales resumed from a new factory. In 2007 JZR introduced a new model, the Daytona.

The firm's current status is unclear. An Australian report in 2008 already noted rumours that production had ended. A kit-car forum post in 2012 said the cars were no longer made. The JZR Wikipedia article says the car “continues in production today”, but that statement is undated and cites no source, so the more specific reports carry more weight. A specification page naming John Ziemba as maker was last active around 2016. A limited company called JZR Cars Ltd (number 12867891), registered for motor vehicle manufacture at Penwortham, Preston, existed from 9 September 2020 until it was dissolved on 11 February 2025. Its director was not John Ziemba, and no source links it to the JZR three-wheeler. The connection is unproven.

Construction and models

The kit chassis is a steel box-section or square-tube space frame with welded or galvanised steel floor and side panels, and glass-fibre front and tail sections. It was supplied assembled, with engine mounts and a bracket for the rear bevel box. At the front the car uses Ford Cortina Mk IV/V stub axles and disc brakes on JZR wishbones with coil-over dampers, and Ford Escort Mk II rack-and-pinion steering. Some builders have used other racks. The rear wheel, swinging arm, shaft drive, bevel box, suspension and brake all come from the donor motorcycle. The maker's specification gives a total weight of 420 kg and a 90-inch wheelbase. There were two body styles: the “barrel-back”, with an exposed spare wheel, and the rounded “beetle-back”. The 2007 Daytona was a different design with a rear-mounted engine.

Engines and engine management

EngineType and outputFuel and ignitionNotes Honda CX500497 cc water-cooled V-twin; 48 hp in standard formTwo constant-velocity (CV) carburettors; electronic ignitionThe original and most common engine. Five-speed gearbox with no reverse Honda CX650673 cc V-twin; 77 hpCarburettorsCommon alternative Honda CX500 Turbo / CX650 TurboTurbocharged; 82 hp / 100 hpHonda programmed fuel injection, the only electronically injected engine on the usual JZR listListed as an option. How many were built is not known Honda GL500Water-cooled V-twin from the same familyCarburettors; transistorised ignitionOne sale listing Honda ST1100 Pan-European1100 cc V4; 100 hpFour CV carburettors with 34.5 mm boresThe fastest option. About six cars reported with this engine and rear end Moto Guzzi 850 / 1000Air-cooled 90-degree V-twinCarburetted. Dell'Orto carburettors are standard on the donor Le Mans models, but the carburettors on JZR builds are not documentedReported as the traditional choice in some sources Harley-Davidson Evolution V-twinAir-cooled V-twinCarburettedFew built; uses a Ford Cortina gearbox and clutch Triumph T595 Daytona (Daytona model)955 cc inline triple; about 128 hpSequential multipoint fuel injection under Sagem engine management (MC2000 on the T595, MC1000 on later 955i engines)Rear-mounted, introduced 2007

JZR did not make or modify engines. Each car keeps the fuelling and ignition of its donor motorcycle, so the engine fitted should be identified on the car itself. Most JZRs are carburetted Honda CX twins and have no ECU to tune. The exceptions are the rare CX Turbo installations and the Triumph-engined Daytona, which use their donor's electronic injection. For carburettor background, see carburettor makes and model families.

Not established

Whether JZR stopped trading, and if so when, or whether anyone now supplies kits or parts. Total production after 2000, and how many Daytonas were built. The exact founding year, which sources give as anywhere from the late 1980s to 1990.

Sources

JZR Trikes, English Wikipedia (unreferenced). Accessed 19 November 2026. JZR 3 wheeler, Just Cars (Australia), 2 March 2008. Accessed 19 November 2026. JZR specification, John Ziemba, Darwen (undated specification page; blog active around 2016). Accessed 19 November 2026. Forum thread on 2CV- and motorcycle-powered three-wheelers, LocostBuilders, 5 July 2012. Accessed 19 November 2026. Morgan 3-Wheeler replica: 2015 JZR Beetleback, Barn Finds, 13 September 2024. Accessed 19 November 2026. JZR Cars Ltd, company number 12867891, and officers, Companies House. Accessed 19 November 2026. JZR Morgan 3-wheeler replica with Honda GL500 power, Uncommon Motors (sale listing). Read through a search-engine summary. Accessed 19 November 2026. Honda CX series, Honda ST1100, Triumph Daytona 955i and Moto Guzzi Le Mans, English Wikipedia (donor engine fuelling). Accessed 19 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: JZR: history and cars

JZR is a British kit-built three-wheeler in the style of the Morgan three-wheelers of the 1920s and 1930s. It has two wheels at the front and one driven rear wheel, and it is powered by a motorcycle engine that drives the rear wheel through the motorcycle's own gearbox and shaft drive. Most cars use a Honda CX500 or CX650 V-twin. The name comes from John Ziemba Restorations of Darwen, Lancashire. There is no evidence that JZR kits were made or sold in 2025–2026: the firm has no website and no recent press coverage. Cars remain in use and still appear at shows.

History and status

John Ziemba, a Morgan enthusiast, developed the JZR at his workshop in Nancy Street Yard, Darwen. Sources place its introduction between the late 1980s and 1990, the year Wikipedia gives for the start of marketing. About 320 of the original style were built up to 1998, according to the owners' club estimate. In 1998 UK kit sales stopped over an undisclosed legal matter, although a few kits were still exported. About two years later sales resumed from a new factory. In 2007 JZR introduced a new model, the Daytona.

The firm's current status is unclear. An Australian report in 2008 already noted rumours that production had ended. A kit-car forum post in 2012 said the cars were no longer made. The JZR Wikipedia article says the car “continues in production today”, but that statement is undated and cites no source, so the more specific reports carry more weight. A specification page naming John Ziemba as maker was last active around 2016. A limited company called JZR Cars Ltd (number 12867891), registered for motor vehicle manufacture at Penwortham, Preston, existed from 9 September 2020 until it was dissolved on 11 February 2025. Its director was not John Ziemba, and no source links it to the JZR three-wheeler. The connection is unproven.

Construction and models

The kit chassis is a steel box-section or square-tube space frame with welded or galvanised steel floor and side panels, and glass-fibre front and tail sections. It was supplied assembled, with engine mounts and a bracket for the rear bevel box. At the front the car uses Ford Cortina Mk IV/V stub axles and disc brakes on JZR wishbones with coil-over dampers, and Ford Escort Mk II rack-and-pinion steering. Some builders have used other racks. The rear wheel, swinging arm, shaft drive, bevel box, suspension and brake all come from the donor motorcycle. The maker's specification gives a total weight of 420 kg and a 90-inch wheelbase. There were two body styles: the “barrel-back”, with an exposed spare wheel, and the rounded “beetle-back”. The 2007 Daytona was a different design with a rear-mounted engine.

Engines and engine management

EngineType and outputFuel and ignitionNotes
Honda CX500497 cc water-cooled V-twin; 48 hp in standard formTwo constant-velocity (CV) carburettors; electronic ignitionThe original and most common engine. Five-speed gearbox with no reverse
Honda CX650673 cc V-twin; 77 hpCarburettorsCommon alternative
Honda CX500 Turbo / CX650 TurboTurbocharged; 82 hp / 100 hpHonda programmed fuel injection, the only electronically injected engine on the usual JZR listListed as an option. How many were built is not known
Honda GL500Water-cooled V-twin from the same familyCarburettors; transistorised ignitionOne sale listing
Honda ST1100 Pan-European1100 cc V4; 100 hpFour CV carburettors with 34.5 mm boresThe fastest option. About six cars reported with this engine and rear end
Moto Guzzi 850 / 1000Air-cooled 90-degree V-twinCarburetted. Dell'Orto carburettors are standard on the donor Le Mans models, but the carburettors on JZR builds are not documentedReported as the traditional choice in some sources
Harley-Davidson Evolution V-twinAir-cooled V-twinCarburettedFew built; uses a Ford Cortina gearbox and clutch
Triumph T595 Daytona (Daytona model)955 cc inline triple; about 128 hpSequential multipoint fuel injection under Sagem engine management (MC2000 on the T595, MC1000 on later 955i engines)Rear-mounted, introduced 2007

JZR did not make or modify engines. Each car keeps the fuelling and ignition of its donor motorcycle, so the engine fitted should be identified on the car itself. Most JZRs are carburetted Honda CX twins and have no ECU to tune. The exceptions are the rare CX Turbo installations and the Triumph-engined Daytona, which use their donor's electronic injection. For carburettor background, see carburettor makes and model families.

Not established

  • Whether JZR stopped trading, and if so when, or whether anyone now supplies kits or parts.
  • Total production after 2000, and how many Daytonas were built.
  • The exact founding year, which sources give as anywhere from the late 1980s to 1990.

Sources

Revision 1: JZR: history and cars

JZR is a British kit-built three-wheeler in the style of the Morgan three-wheelers of the 1920s and 1930s. It has two wheels at the front and one driven rear wheel, and it is powered by a motorcycle engine that drives the rear wheel through the motorcycle's own gearbox and shaft drive. Most cars use a Honda CX500 or CX650 V-twin. The name comes from John Ziemba Restorations of Darwen, Lancashire. There is no evidence that JZR kits were made or sold in 2025–2026: the firm has no website and no recent press coverage. Cars remain in use and still appear at shows.

History and status

John Ziemba, a Morgan enthusiast, developed the JZR at his workshop in Nancy Street Yard, Darwen. Sources place its introduction between the late 1980s and 1990, the year Wikipedia gives for the start of marketing. About 320 of the original style were built up to 1998, according to the owners' club estimate. In 1998 UK kit sales stopped over an undisclosed legal matter, although a few kits were still exported. About two years later sales resumed from a new factory. In 2007 JZR introduced a new model, the Daytona.

The firm's current status is unclear. An Australian report in 2008 already noted rumours that production had ended. A kit-car forum post in 2012 said the cars were no longer made. The JZR Wikipedia article says the car “continues in production today”, but that statement is undated and cites no source, so the more specific reports carry more weight. A specification page naming John Ziemba as maker was last active around 2016. A limited company called JZR Cars Ltd (number 12867891), registered for motor vehicle manufacture at Penwortham, Preston, existed from 9 September 2020 until it was dissolved on 11 February 2025. Its director was not John Ziemba, and no source links it to the JZR three-wheeler. The connection is unproven.

Construction and models

The kit chassis is a steel box-section or square-tube space frame with welded or galvanised steel floor and side panels, and glass-fibre front and tail sections. It was supplied assembled, with engine mounts and a bracket for the rear bevel box. At the front the car uses Ford Cortina Mk IV/V stub axles and disc brakes on JZR wishbones with coil-over dampers, and Ford Escort Mk II rack-and-pinion steering. Some builders have used other racks. The rear wheel, swinging arm, shaft drive, bevel box, suspension and brake all come from the donor motorcycle. The maker's specification gives a total weight of 420 kg and a 90-inch wheelbase. There were two body styles: the “barrel-back”, with an exposed spare wheel, and the rounded “beetle-back”. The 2007 Daytona was a different design with a rear-mounted engine.

Engines and engine management

EngineType and outputFuel and ignitionNotes
Honda CX500497 cc water-cooled V-twin; 48 hp in standard formTwo constant-velocity (CV) carburettors; electronic ignitionThe original and most common engine. Five-speed gearbox with no reverse
Honda CX650673 cc V-twin; 77 hpCarburettorsCommon alternative
Honda CX500 Turbo / CX650 TurboTurbocharged; 82 hp / 100 hpHonda programmed fuel injection, the only electronically injected engine on the usual JZR listListed as an option. How many were built is not known
Honda GL500Water-cooled V-twin from the same familyCarburettors; transistorised ignitionOne sale listing
Honda ST1100 Pan-European1100 cc V4; 100 hpFour CV carburettors with 34.5 mm boresThe fastest option. About six cars reported with this engine and rear end
Moto Guzzi 850 / 1000Air-cooled 90-degree V-twinCarburetted. Dell'Orto carburettors are standard on the donor Le Mans models, but the carburettors on JZR builds are not documentedReported as the traditional choice in some sources
Harley-Davidson Evolution V-twinAir-cooled V-twinCarburettedFew built; uses a Ford Cortina gearbox and clutch
Triumph T595 Daytona (Daytona model)955 cc inline triple; about 128 hpSequential multipoint fuel injection under Sagem engine management (MC2000 on the T595, MC1000 on later 955i engines)Rear-mounted, introduced 2007

JZR did not make or modify engines. Each car keeps the fuelling and ignition of its donor motorcycle, so the engine fitted should be identified on the car itself. Most JZRs are carburetted Honda CX twins and have no ECU to tune. The exceptions are the rare CX Turbo installations and the Triumph-engined Daytona, which use their donor's electronic injection. For carburettor background, see carburettor makes and model families.

Not established

  • Whether JZR stopped trading, and if so when, or whether anyone now supplies kits or parts.
  • Total production after 2000, and how many Daytonas were built.
  • The exact founding year, which sources give as anywhere from the late 1980s to 1990.

Sources