Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Car makes
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Marlin Sportscars

Marlin Sportscars (Marlin Sports Cars Ltd) was a Devon kit and component car maker, founded in 1979, that built front-engined roadsters on donor running gear and later the mid-engined 5EXi. The business closed in 2018–19 and was offered for sale. A former employee bought it in 2021 under a new company, Marlin Cars Ltd, but that company has filed dormant accounts since 2023 and no new production has been documented.

History

Paul Moorhouse founded the firm as Marlin Engineering in Plymouth in 1979, after building a series of one-off cars for his own use. Its first kits went on sale that year. In 1992 the original Roadster and Berlinetta designs were sold to Yorkshire Kit Cars, which built them until its owner retired in 2006 and then sold them to Aquila Sports Cars Ltd. The owners' club history records that Aquila holds the Roadster jigs and moulds and the Berlinetta moulds, with limited parts support for the Berlinetta.

The Devon business was taken over by Terry and Mark Matthews, and later traded from Holmfield House, Trobridge, near Crediton. Wikipedia dates the change to the mid-1990s, while the company's own sale notice says its owner had held the business since 1993. The company's own statement is the better source. In 2016 Marlin bought Avatar Sports Cars and launched the Avatar Roadster, a track car with a Ford EcoBoost engine. Marlin also supported 5EXi racing at Castle Combe.

Production stopped in 2018–19. The owners' club gives June 2018 as the closure date, while Wikipedia says the company had ceased trading by May 2019. A sale notice on the company website offered the Marlin name, jigs, moulds and rights for the BMW-based Sportster and Cabrio for offers over £45,000, and the EXi tooling separately for offers over £9,500. The earlier company, by then renamed Fieldholm Ltd, was dissolved on 30 November 2021. Kevin Richardson, who the owners' club says joined Marlin as a 17-year-old apprentice welder and worked there for 28 years, bought the business in April 2021. Marlin Cars Ltd (13463819), with Richardson as sole director, was incorporated on 18 June 2021 and is registered in Wellington, Somerset, for motor vehicle manufacture. It filed micro-company accounts for 2022 and dormant accounts for the years to June 2023, 2024 and 2025. A 2025 compulsory strike-off notice was discontinued in December 2025. The Marlin website still says the company is closed and looking for a new owner. An undated owners' forum post says Richardson was unlikely to market further Sportster or Cabrio kits but might supply parts.

Models and engines

Front view of a 2006 Marlin 5EXi mid-engined roadster at a kit car show.
2006 Marlin EXi 2.0 at the National Kit Car Motor Show, Stoneleigh, 2019. Photo: Vauxford, Wikimedia Commons, CC BY-SA 4.0; resized.
ModelYearsLayout and donorEnginesSupplied as
Roadster1979 to 1992 at Marlin; then built by YKC and AquilaFront-engine two-seater, aluminium and glassfibre body; Triumph Herald, Vitesse, Spitfire or GT6 donor, then Morris Marina from 1981Triumph four and six (1,147–2,498 cc), then Marina enginesKit
BerlinettaFrom 1983Front-engine 2+2 coupé with wind-up windows; Ford Cortina Mk III or IV, later SierraFord donor engines (not detailed in sources)Kit
CabrioFrom 1991Updated Roadster on Ford Sierra partsFord donor enginesKit
HunterAbout 1998Development of the CabrioNot establishedFactory-built
SportsterBy 1998 (cars of that year are advertised) to 2018Front-engine, rear drive; BMW donor (straight-six, five-speed manual, BMW rear end); aluminium panels; about 850 kg; an E39 5 Series single-donor kit was announced laterBMW straight-six 2.0–3.5, with an M3 engine as the top option. The factory demonstrator had a 3.0 turbodiesel with over 200 bhpKit or factory-built
5EXiMid-2000s to 2018 (launch coverage mentions Marlin's 25th anniversary, which points to about 2004)Mid-engine spaceframe, glassfibre panels, about 650 kgHonda B16, B18 or K20; Rover K-series 1.1–1.8; Rover T-series 2.0 turbo; Audi 1.8T (Wikipedia list). The company website names Vauxhall and Honda engines, and the sale notice calls the EXi VW/Audi-based. These sources reflect different stages of production, and no single list covers every period.Kit (claimed about 120–150 hours) or factory-built

Engine management in all models came with the donor engine. No Marlin-supplied aftermarket ECU or calibration has been documented. For Rover K-series cars, see Rover MEMS.

A 2008 Marlin Sportster roadster with BMW mechanicals.
2008 Marlin Sportster with BMW mechanicals, photographed in 2010. Photo: dave_7, Wikimedia Commons, CC BY 2.0; resized.

Not established

  • Whether Marlin Cars Ltd has built or sold any kits or parts since 2021.
  • Launch dates of the Sportster and 5EXi, and production totals for every model.
  • Which BMW engine generations and engine-management systems were used in Sportsters, and which ECUs were used in 5EXi installations.

Sources