Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Vehicles
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bentley

The Bentley Turbo R was a turbocharged four-door saloon built at Crewe from 1985 to 1997. It was developed from the Mulsanne Turbo, with firmer suspension and steering. The Turbo R used the turbocharged 6.75-litre L410 V8 and established Bentley as the sporting marque of Rolls-Royce Motors. Including the long-wheelbase Turbo RL, 7,230 were built. The Turbo S of 1995 and the Turbo RT of 1997–98 were higher-output derivatives. Rolls-Royce did not publish power outputs before about 1990, so early figures are period estimates.

A Bentley Turbo R.
A 1990 Bentley Turbo R. Photo: The Car Spy, Wikimedia Commons, CC BY 2.0; resized and re-encoded.

Variants

VersionYearsOutputBuilt
Turbo R / Turbo RL1985–97about 296 hp / 660 Nm (period estimate), rising to about 385 hp7,230
Turbo S1995408 hp60
Turbo RT1997–98400 bhp252
Turbo RT Mulliner1998420 bhp / 860 Nm56

Engine management and gearbox

PeriodFuel system or ECUGearbox
1985–86 (early cars)Garrett turbocharger blowing through a Solex 4A1 four-choke carburettor, as on the Mulsanne TurboGM TH400 three-speed
From October 1986 (MY1987)Bosch MK-Motronic: continuous K-Jetronic-based injection with Motronic mapped ignition. An intercooler was added in late 1988.TH400; GM 4L80-E four-speed from about 1991–92
From about MY1996, and the Turbo RTZytek EMS3 engine management. The 1995 Turbo S used a Bosch Motronic system with digital ignition.4L80-E

The date the Turbo R changed to Zytek is given as 1995 or as model year 1996, depending on the source. The changeover chassis number is not established. More detail is in Bentley engines and engine management.

Sources