Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Link standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Hardware revisions

Voodoo Pro V1 and Voodoo Pro V2 have separate manufacturer quick-start guides. V1 has a six-way CAN 1/K-line port; V2 uses a four-way CAN 1 port and a separate Ethernet connector. Header assignments also differ, so use the appropriate revision's guide rather than assuming a shared pinout.

Link G5 Voodoo Pro is a programmable G5 wire-in engine-management ECU. Manufacturer lists up to 12-cylinder control and dual onboard lambda sensor control. Some injector/ignition/auxiliary drives have shared uses; check the model revision and allocation. Link G5 Voodoo Pro quick-start guide.

Link G5 Voodoo Pro ECU
G5 Voodoo Pro, image: Link ECU. Reproduced with user-confirmed permission.

Model identification and I/O

ItemDocumented details
ECU familyG5
OutputsUp to 16 injection and 12 ignition drives
ProgrammingPCLink version matched to ECU generation and firmware
Connector and loomSee the exact-model guide, including connector keys, wire-side orientation and optional functions

The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.

Model-specific pinout and installation

The G5 Voodoo Pro quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.

The manufacturer publishes separate Voodoo Pro V1 and V2 guides: establish the revision before using a pinout.

Connector pinouts

The header pinouts differ between revisions and are drawn separately in the Link G5 Voodoo Pro V1 connector pinout and the Link G5 Voodoo Pro V2 connector pinout.

Software and further sources

Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.