Removed text is struck through; added text is highlighted.
MaxxECU Toyota Supra MKIV (2JZ) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Toyota Supra MKIV (2JZ) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
PinDescriptionUsageNote1Wide band (VREF)2Wide band (VS)3Wide band (shield)4Wide band (H-)5GPO 6Output6GPO 7 / DIN 3Output or digital input7-8INJ 7Output9Wide band (IP)10Wide band (RCAL)11+12VOutput12+12VOutput13Engine GND14AIN 1temperature input15AIN 2temperature input16AIN 30-5V analog input
The extra connectors of this adapter are redrawn as a structured pinout in MaxxECU Toyota Supra MKIV (2JZ) plug-in adapter connector pinout.
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
MaxxECU Toyota Supra MKIV (2JZ) adapter installation and pinoutGEN1 plug-in compatibility and wiring indexMaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: MaxxECU Toyota Supra MKIV (2JZ) plug-in adapterMaxxECU Toyota Supra MKIV (2JZ) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Toyota Supra MKIV (2JZ) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OEM options
MaxxECU IO
V1
RACE
Fuel pump (stock)
IGN 7
Yes
Yes
Tachometer
GPO 8
Yes
Yes
Vehicle speed
DIN 2
Yes
Yes
AC request
DIN 1
Yes
Yes
Error light
GPO 5
Yes
Yes
Idle stepper
GPO 1,2,3,4
Yes
Yes
AC clutch
INJ 8
Yes
Yes
Stock boost solenoids
-
No
No
VVTi
-
No
No
Engine fan
-
-
-
Bluetooth ( MDash)
Yes
Yes
OEM Knock sensor(s)
No
No
EGT option
Yes, direct
Yes, direct
Wide band lambda
Yes , External
Yes , External
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Revision 3: MaxxECU Toyota Supra MKIV (2JZ) plug-in adapterMaxxECU Toyota Supra MKIV (2JZ) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Toyota Supra MKIV (2JZ) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OEM options
MaxxECU IO
V1
RACE
Fuel pump (stock)
IGN 7
Yes
Yes
Tachometer
GPO 8
Yes
Yes
Vehicle speed
DIN 2
Yes
Yes
AC request
DIN 1
Yes
Yes
Error light
GPO 5
Yes
Yes
Idle stepper
GPO 1,2,3,4
Yes
Yes
AC clutch
INJ 8
Yes
Yes
Stock boost solenoids
-
No
No
VVTi
-
No
No
Engine fan
-
-
-
Bluetooth ( MDash)
Yes
Yes
OEM Knock sensor(s)
No
No
EGT option
Yes, direct
Yes, direct
Wide band lambda
Yes , External
Yes , External
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.