Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Haltech Platinum Sprint 500
Applies to
Haltech Platinum Sprint 500
Tool groups
None
Manufacturers
Haltech

Connector

The Haltech Platinum Sprint 500 has a single 32-pin ECU connector. The ECU connection table in Haltech's Platinum Sprint 500 quick start guide (Figure 14) draws it as two rows of 16: pins 16 to 1 run from left to right along the top row and pins 32 to 17 along the bottom row. The guide does not state the viewing side. The assignments below are manufacturer documentation.

Pin groups

  • Outputs: injectors 1–4 (pins 16, 15, 14 and 13), ignition outputs 1–4 (32, 31, 30 and 29), tacho output DPO 1 (6), thermofan output DPO 2 (7), general-purpose outputs DPO 3 and DPO 4 (8 and 9), and fuel pump relay trigger (12).
  • Inputs: trigger + and − (1 and 17), home + and − (2 and 18), road speed input DPI 1 (4), auxiliary rev limiter AVI 1 (20), O2 sensor input (21), coolant temperature ATI 1 (24), air temperature ATI 2 (25), MAP (26) and TPS (27).
  • Power: switched +12 V (10 and 11), signal ground (22), power ground (23) and +5 V sensor supply (28).

Positions 3, 5 and 19 have no function listed in the guide. The guide states that the injector outputs are for high-impedance injectors (above 8 ohms) and that the ignition outputs require suitable external ignition amplifiers or a CDI.

Haltech Platinum Sprint 500 32-pin connector face with pin numbers coloured by function
32-pin connector as drawn in the Haltech guide, coloured by function group; viewing side not stated. Redrawn by Tuning Wiki.

Sources

Connector pinout

Applicability

Haltech Platinum Sprint 500: single 32-pin ECU connector as given in the ECU connection table (Figure 14) of Haltech's Platinum Sprint 500 quick start guide. The guide draws two rows of 16, numbered 16 to 1 along the top row and 32 to 17 along the bottom, without stating the viewing side. Positions 3, 5 and 19 have no function listed and are marked unknown. Manufacturer documentation.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

ECU connector (32-pin)

Redrawn connector faces
View: As drawn in the manufacturer guide; viewing side not stated
ECU connector (32-pin) — Redrawn connector faces. As drawn in the manufacturer guide; viewing side not stated

Select a pin in a photograph or the index to highlight it.

ECU connector (32-pin) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Trigger + (crank)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Home + (cam)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Unknown function
Cavity: Unknown
Unknown
Road speed input (DPI 1)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Unknown function
Cavity: Unknown
Unknown
Tacho output (DPO 1)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Thermofan output (DPO 2)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

General purpose output 1 (DPO 3)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

General purpose output 2 (DPO 4)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

+12 V switched
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

+12 V switched
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Fuel pump relay trigger
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Injector 4
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Injector 3
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Injector 2
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Injector 1
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Trigger - (crank)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Home - (cam)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Unknown function
Cavity: Unknown
Unknown
Aux rev limiter (AVI 1)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

O2 sensor input
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Signal ground
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Power ground
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Coolant temperature (ATI 1)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Air temperature (ATI 2)
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

MAP
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

TPS
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

+5 V sensor supply
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Ignition output 4
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Ignition output 3
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Ignition output 2
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table

Ignition output 1
Cavity: Populated
Confirmed

Haltech Platinum Sprint 500 quick start guide, ECU connection table