Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Link standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

Link G4+ Atom is a programmable G4+ wire-in engine-management ECU. Earlier single A loom model; the quick-start lists two trigger inputs, three analogue voltage inputs and two temperature inputs. Link G4+ Atom quick-start guide.

Model identification and I/O

ItemDocumented detailsECU familyG4+Outputs4 injection and 4 ignition drivesProgrammingPCLink version matched to ECU generation and firmwareConnector and loomSee the exact-model guide, including connector keys, wire-side orientation and optional functions

The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.

Model-specific pinout and installation

The G4+ Atom quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for cavity positions (the drawing prints no cavity numbers), wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.

The A loom drawing from the quick start guide is redrawn with every cavity in Link G4+ Atom connector pinout.

Software and further sources

Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.

G4+ Atom as shown in Link’s catalogue; confirm the hardware revision. Image: Link Engine Management G4+ catalogue, reproduced with permission.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Link G4+ Atom

Link G4+ Atom is a programmable G4+ wire-in engine-management ECU. Earlier single A loom model; the quick-start lists two trigger inputs, three analogue voltage inputs and two temperature inputs. Link G4+ Atom quick-start guide.

Model identification and I/O

ItemDocumented details
ECU familyG4+
Outputs4 injection and 4 ignition drives
ProgrammingPCLink version matched to ECU generation and firmware
Connector and loomSee the exact-model guide, including connector keys, wire-side orientation and optional functions

The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.

Model-specific pinout and installation

The G4+ Atom quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for cavity positions (the drawing prints no cavity numbers), wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.

The A loom drawing from the quick start guide is redrawn with every cavity in Link G4+ Atom connector pinout.

Software and further sources

Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.

Link G4+ atom ECU
G4+ Atom as shown in Link’s catalogue; confirm the hardware revision. Image: Link Engine Management G4+ catalogue, reproduced with permission.
Revision 3: Link G4+ Atom

Link G4+ Atom is a programmable G4+ wire-in engine-management ECU. Earlier single A loom model; the quick-start lists two trigger inputs, three analogue voltage inputs and two temperature inputs. Link G4+ Atom quick-start guide.

Model identification and I/O

ItemDocumented details
ECU familyG4+
Outputs4 injection and 4 ignition drives
ProgrammingPCLink version matched to ECU generation and firmware
Connector and loomSee the exact-model guide, including connector keys, wire-side orientation and optional functions

The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.

Model-specific pinout and installation

The G4+ Atom quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for cavity positions (the drawing prints no cavity numbers), wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.

The A loom drawing from the quick start guide is redrawn with every cavity in Link G4+ Atom connector pinout.

Software and further sources

Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.

Link G4+ atom ECU
G4+ Atom as shown in Link’s catalogue; confirm the hardware revision. Image: Link Engine Management G4+ catalogue, reproduced with permission.