Documented connector pins
The original Emerald K6 (introduced in 2010) has a 36-way main connector and a 9-way COMMS connector. Emerald's published K6 documents do not include a complete main-connector table or a connector drawing, so only the positions they name are listed here. The K6 ECU Configuration Guide (manufacturer documentation) uses pin 4 for ignition driver 3 in a six-cylinder configuration or otherwise main relay control, and pin 5 for ignition driver 2 in its wasted-spark example. A narrowband lambda sensor connects to pin 7 with its ground on pin 18; the MAP sensor signal is usually on pin 34; a wideband controller's 0–5 V output is commonly taken to pin 35 (any free auxiliary input can be used); and AuxOut36 serves as an example narrowband heater control.
The 9-way COMMS connector carries CAN high and low on pins 1 and 2, signal earth on pin 5 and RS232 receive, transmit and clear-to-send on pins 7 to 9, according to Race Technology's integration instructions for its data loggers (third-party documentation, graded suspected). Both connectors are drawn as pin indexes because their faces are not shown in the sources. These assignments must not be transferred to the later K6+, and the main-connector positions not listed here are not established for the original K6.
Sources
- Emerald K6 ECU Configuration Guide Rev 3, Emerald M3D, 1 March 2012. Manufacturer documentation. Accessed 19 November 2026.
- Race Technology: Emerald K3 and K6 CAN; COMMS connector assignments. Third-party integration instructions. Accessed 19 November 2026.
Connector pinout
Original Emerald K6 (introduced 2010). Only pins documented in the sources are listed: seven main 36-way connector positions from the Emerald K6 ECU Configuration Guide (1 March 2012; manufacturer documentation, configuration examples) and the 9-way COMMS connector from Race Technology's K3/K6 CAN integration instructions (third-party, graded suspected). A full K6 main-connector table and the connector face are not given in these sources, so both connectors are drawn as pin indexes. Not to be transferred to the K6+.
View orientation is stated beside each photograph. Unknown functions remain in the pin index.
Main 36-way connector (documented pins only)
View: Pin index; face layout not shown in the source
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Ignition driver 3 (six-cylinder configuration) or main relay control Cavity: Populated |
Confirmed Emerald K6 Configuration Guide 2012 |
||
| Ignition driver 2 (wasted-spark example) Cavity: Populated |
Confirmed Emerald K6 Configuration Guide 2012 |
||
| Narrowband oxygen sensor signal Cavity: Populated |
Confirmed Emerald K6 Configuration Guide 2012 |
||
| Narrowband oxygen sensor signal ground Cavity: Populated |
Confirmed Emerald K6 Configuration Guide 2012 |
||
| MAP sensor signal (usual location) Cavity: Populated |
Confirmed Emerald K6 Configuration Guide 2012 |
||
| Wideband controller 0-5 V signal (common example; any free AuxIn) Cavity: Populated |
Confirmed Emerald K6 Configuration Guide 2012 |
||
| AuxOut36, e.g. narrowband sensor heater control Cavity: Populated |
Confirmed Emerald K6 Configuration Guide 2012 |
9-way COMMS connector
View: Pin index; face layout not shown in the source
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| CAN high Cavity: Populated |
Suspected Race Technology K3/K6 CAN instructions |
||
| CAN low Cavity: Populated |
Suspected Race Technology K3/K6 CAN instructions |
||
| Not used Cavity: Unused |
Suspected Race Technology K3/K6 CAN instructions |
||
| Not used Cavity: Unused |
Suspected Race Technology K3/K6 CAN instructions |
||
| Signal earth Cavity: Populated |
Suspected Race Technology K3/K6 CAN instructions |
||
| Not used Cavity: Unused |
Suspected Race Technology K3/K6 CAN instructions |
||
| RS232 receive Cavity: Populated |
Suspected Race Technology K3/K6 CAN instructions |
||
| RS232 transmit Cavity: Populated |
Suspected Race Technology K3/K6 CAN instructions |
||
| RS232 clear to send Cavity: Populated |
Suspected Race Technology K3/K6 CAN instructions |