
FuelTech FT600 is a PowerFT engine-management unit. PowerFT ECU with 20 configurable inputs and 32 outputs, including support for up to 16 injector channels as configured. It integrates a display and data logging. FuelTech model documentation · FuelTech range comparison.
Identification and software
Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager. FuelTech software and compatibility.
Wiring and pinout
Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.
See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.
FT600 ECU connector pin assignments
The FuelTech FT600 manual, sections 4.3 and 4.4, identifies two 34-way ECU connectors. The listed sensor and output functions are configurable; use the exact revision and check the connector view, driver ratings, protection and ground routing in the original. The magnetic trigger references are not generic Hall sensor grounds.
Connector A — 34 way
| Pin | Function and harness wire |
|---|---|
| 1 | Blue output #1 (blue #1) |
| 2 | Blue output #2 (blue #2) |
| 3 | Blue output #3 (blue #3) |
| 4 | Blue output #4 (blue #4) |
| 5 | Blue output #5 (blue #5) |
| 6 | Blue output #6 (blue #6) |
| 7 | Blue output #7 (blue #7) |
| 8 | Blue output #8 (blue #8) |
| 9 | Blue output #9 (blue #9) |
| 10 | Blue output #10 (blue #10) |
| 11 | Blue output #11 (blue #11) |
| 12 | Blue output #12 (blue #12) |
| 13 | Blue output #13 (blue #13) |
| 14 | Blue output #14 (blue #14) |
| 15 | Blue output #15 (blue #15) |
| 16 | Blue output #16 (blue #16) |
| 17 | Power ground (black/white) |
| 18 | Gray output #1 (gray #1) |
| 19 | Gray output #2 (gray #2) |
| 20 | Gray output #3 (gray #3) |
| 21 | Gray output #4 (gray #4) |
| 22 | Gray output #5 (gray #5) |
| 23 | Gray output #6 (gray #6) |
| 24 | Gray output #7 (gray #7) |
| 25 | Gray output #8 (gray #8) |
| 26 | Yellow output #1 (yellow #1) |
| 27 | Yellow output #2 (yellow #2) |
| 28 | Yellow output #3 (yellow #3) |
| 29 | Yellow output #4 (yellow #4) |
| 30 | Yellow output #5 (yellow #5) |
| 31 | Yellow output #6 (yellow #6) |
| 32 | Yellow output #7 (yellow #7) |
| 33 | Yellow output #8 (yellow #8) |
| 34 | 12 V input from main relay (red) |
Connector B — 34 way
| Pin | Function and harness wire |
|---|---|
| 1 | RPM signal input (red) |
| 2 | Magnetic RPM sensor reference (white) |
| 3 | Cam sync signal input (red) |
| 4 | Cam sync reference input (white) |
| 5 | White input #1 |
| 6 | White input #2 |
| 7 | White input #3 |
| 8 | White input #4 |
| 9 | White input #5 |
| 10 | Battery negative (black) |
| 11 | CAN A low (yellow/blue) |
| 12 | CAN A high (white/red) |
| 13 | White input #6 |
| 14 | White input #7 |
| 15 | White input #8 |
| 16 | White input #9 |
| 17 | White input #10 |
| 18 | Power ground (black/white) |
| 19 | Power ground (black/white) |
| 20 | CAN B high (white/red) |
| 21 | White input #11 |
| 22 | White input #12 |
| 23 | White input #13 |
| 24 | White input #14 |
| 25 | White input #15 |
| 26 | 12 V input from main relay (red) |
| 27 | 5 V sensor supply (green/red) |
| 28 | CAN B low (yellow/blue) |
| 29 | Sensor ground (green/black) |
| 30 | White input #16 |
| 31 | White input #17 |
| 32 | White input #18 |
| 33 | White input #19 / Power Shift positive |
| 34 | White input #20 / Power Shift negative |
Use the manual's power, grounding, relay and sensor instructions; power-ground and sensor-ground circuits have different functions. The optional Power Shift uses input channels 19 and 20 on this model.
Structured pinout
A structured pin index and redrawn connector diagrams for the FT450, FT550, FT550LITE and FT600 are in FuelTech FT450, FT550 and FT600 connector pinout.
Not established
The microcontroller used in the PowerFT ECUs is not named in FuelTech's published documentation.