Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Link standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 4

Removed text is struck through; added text is highlighted.

G4 RX is a historic Link ECU model. Link's 2010 G4 installation manual explicitly lists the G4 RX. The manufacturer A-loom application guide also lists G4 RX, but that does not imply the later G4+ or G4X pin assignments. Link G4 Wiring & Installation Manual, 2010.

Identification and documentation

Record the label, ECU board, software, connectors and loom; G4, G4+ and G4X identify different generations. The manufacturer manual includes G4 model-specific wiring guidance. Review the actual G4 RX connector view and pinout rather than using a newer similarly named product.

For software use Link's legacy PCLink guidance, checking actual firmware and upgrade history. Other Link ECU references.

Original G4 RX header

From page 17 of Link's 2010 G4 wiring and installation manual; the drawing is viewed into the ECU header or the wire side of the loom connector. The manual numbers the 34-way connector. Pin 22 is shared between analogue voltage 2 and digital input 4. This is the original G4 model; later G4+ or G4X connectors must be checked separately.From page 17 of Link's 2010 G4 wiring and installation manual; the drawing is viewed into the ECU header or the wire side of the loom connector. The manual’s drawing of the 34-way connector prints no cavity numbers; the positions below count the cavities in reading order (left to right, top to bottom, over rows of 9, 8, 8 and 9) and are not manufacturer cavity numbers. Position 22 is shared between analogue voltage 2 and digital input 4. This is the original G4 model; later G4+ or G4X connectors must be checked separately.

PositionFunctionLoom colour1Inj 4Brown/orange2Inj 3Brown/red3Inj 2Brown4Inj 1Brown/black5+14 VRed6+8 VRed/white7Shield / groundGreen8Trigger 1Black9Trigger 2Red10Ignition 4Blue/orange11Ignition 3Blue/red12Ignition 2Blue/brown13Ignition 1Blue14Analogue volt 4White/black15Temperature 1Yellow16Temperature 2Yellow/brown17Analogue volt 1Yellow/blue18Aux 4Orange19Aux 3Orange/red20Aux 2Orange/brown21Aux 1Orange/black22Analogue volt 2 / digital input 4White/brown23Digital input 3Grey/red24Sensor groundGreen25GroundBlack26Aux 8Orange/purple27Aux 7Orange/blue28Aux 6Orange/green29Aux 5Orange/yellow30Digital input 1Grey/black31Digital input 2Grey/brown32+5 VRed/blue33Analogue volt 3Yellow/black34GroundBlack

The structured pin index and redrawn header are in Link G4 RX and Storm connector pinout, which covers both models because the manual gives them the same 34-pin assignments.The structured pin index and redrawn header are in Link G4 RX connector pinout.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Link G4 RX

G4 RX is a historic Link ECU model. Link's 2010 G4 installation manual explicitly lists the G4 RX. The manufacturer A-loom application guide also lists G4 RX, but that does not imply the later G4+ or G4X pin assignments. Link G4 Wiring & Installation Manual, 2010.

Identification and documentation

Record the label, ECU board, software, connectors and loom; G4, G4+ and G4X identify different generations. The manufacturer manual includes G4 model-specific wiring guidance. Review the actual G4 RX connector view and pinout rather than using a newer similarly named product.

For software use Link's legacy PCLink guidance, checking actual firmware and upgrade history. Other Link ECU references.

Original G4 RX header

From page 17 of Link's 2010 G4 wiring and installation manual; the drawing is viewed into the ECU header or the wire side of the loom connector. The manual’s drawing of the 34-way connector prints no cavity numbers; the positions below count the cavities in reading order (left to right, top to bottom, over rows of 9, 8, 8 and 9) and are not manufacturer cavity numbers. Position 22 is shared between analogue voltage 2 and digital input 4. This is the original G4 model; later G4+ or G4X connectors must be checked separately.

PositionFunctionLoom colour
1Inj 4Brown/orange
2Inj 3Brown/red
3Inj 2Brown
4Inj 1Brown/black
5+14 VRed
6+8 VRed/white
7Shield / groundGreen
8Trigger 1Black
9Trigger 2Red
10Ignition 4Blue/orange
11Ignition 3Blue/red
12Ignition 2Blue/brown
13Ignition 1Blue
14Analogue volt 4White/black
15Temperature 1Yellow
16Temperature 2Yellow/brown
17Analogue volt 1Yellow/blue
18Aux 4Orange
19Aux 3Orange/red
20Aux 2Orange/brown
21Aux 1Orange/black
22Analogue volt 2 / digital input 4White/brown
23Digital input 3Grey/red
24Sensor groundGreen
25GroundBlack
26Aux 8Orange/purple
27Aux 7Orange/blue
28Aux 6Orange/green
29Aux 5Orange/yellow
30Digital input 1Grey/black
31Digital input 2Grey/brown
32+5 VRed/blue
33Analogue volt 3Yellow/black
34GroundBlack

The structured pin index and redrawn header are in Link G4 RX connector pinout.

Revision 4: Link G4 RX

G4 RX is a historic Link ECU model. Link's 2010 G4 installation manual explicitly lists the G4 RX. The manufacturer A-loom application guide also lists G4 RX, but that does not imply the later G4+ or G4X pin assignments. Link G4 Wiring & Installation Manual, 2010.

Identification and documentation

Record the label, ECU board, software, connectors and loom; G4, G4+ and G4X identify different generations. The manufacturer manual includes G4 model-specific wiring guidance. Review the actual G4 RX connector view and pinout rather than using a newer similarly named product.

For software use Link's legacy PCLink guidance, checking actual firmware and upgrade history. Other Link ECU references.

Original G4 RX header

From page 17 of Link's 2010 G4 wiring and installation manual; the drawing is viewed into the ECU header or the wire side of the loom connector. The manual numbers the 34-way connector. Pin 22 is shared between analogue voltage 2 and digital input 4. This is the original G4 model; later G4+ or G4X connectors must be checked separately.

PositionFunctionLoom colour
1Inj 4Brown/orange
2Inj 3Brown/red
3Inj 2Brown
4Inj 1Brown/black
5+14 VRed
6+8 VRed/white
7Shield / groundGreen
8Trigger 1Black
9Trigger 2Red
10Ignition 4Blue/orange
11Ignition 3Blue/red
12Ignition 2Blue/brown
13Ignition 1Blue
14Analogue volt 4White/black
15Temperature 1Yellow
16Temperature 2Yellow/brown
17Analogue volt 1Yellow/blue
18Aux 4Orange
19Aux 3Orange/red
20Aux 2Orange/brown
21Aux 1Orange/black
22Analogue volt 2 / digital input 4White/brown
23Digital input 3Grey/red
24Sensor groundGreen
25GroundBlack
26Aux 8Orange/purple
27Aux 7Orange/blue
28Aux 6Orange/green
29Aux 5Orange/yellow
30Digital input 1Grey/black
31Digital input 2Grey/brown
32+5 VRed/blue
33Analogue volt 3Yellow/black
34GroundBlack

The structured pin index and redrawn header are in Link G4 RX and Storm connector pinout, which covers both models because the manual gives them the same 34-pin assignments.