G4 Lightning is a historic Link ECU model. Link's 2010 wiring and installation manual explicitly lists the G4 Lightning alongside the G4 Atom, RX, Storm and Xtreme. The correct generation and board should be established before wiring. Link G4 Wiring & Installation Manual, 2010.
Identification and documentation
Record the label, ECU board, software, connectors and loom; G4, G4+ and G4X identify different generations. The manufacturer manual includes G4 model-specific wiring guidance. Review the actual G4 Lightning connector view and pinout rather than using a newer similarly named product.
For software use Link's legacy PCLink guidance, checking actual firmware and upgrade history. Other Link ECU references.
Original G4 Lightning header
From page 17 of Link's 2010 G4 wiring and installation manual; the drawing is viewed into the ECU header or the wire side of the loom connector. The manufacturer’s 26-position drawing gives connector functions by physical location but does not number its cavities. The row positions below are counted from the left in that drawing and are not manufacturer cavity numbers. This is the original G4 model; later G4+ or G4X connectors must be checked separately.
| Position | Function | Loom colour |
|---|---|---|
| Top row, 1 from left | Ignition 8 | Brown/orange |
| Top row, 2 from left | Ignition 1 | Blue |
| Top row, 3 from left | Ignition 2 | Blue/brown |
| Top row, 4 from left | Ignition 3 | Blue/red |
| Top row, 5 from left | Ignition 4 | Blue/orange |
| Top row, 6 from left | Trigger 1 | Black |
| Top row, 7 from left | Trigger 2 | Red |
| Second row, 1 from left | Ignition 7 | Brown/red |
| Second row, 2 from left | Aux 1 | Orange/black |
| Second row, 3 from left | Aux 2 | Orange/brown |
| Second row, 4 from left | Aux 3 | Orange/red |
| Second row, 5 from left | Aux 4 | Orange |
| Second row, 6 from left | +14 V | Red |
| Third row, 1 from left | Ignition 6 | Brown |
| Third row, 2 from left | Digital input 1 | Grey/black |
| Third row, 3 from left | Temperature 1 | Yellow |
| Third row, 4 from left | Temperature 2 | Yellow/brown |
| Third row, 5 from left | Ground out | Green |
| Third row, 6 from left | Shield | Green |
| Bottom row, 1 from left | Ignition 5 | Brown/black |
| Bottom row, 2 from left | Digital input 2 | Grey/brown |
| Bottom row, 3 from left | Analogue volt 1 | Yellow/blue |
| Bottom row, 4 from left | Analogue volt 2 | White/brown |
| Bottom row, 5 from left | +5 V | Red/blue |
| Bottom row, 6 from left | Ground | Black |
| Bottom row, 7 from left | Ground | Black |
The structured pin index and redrawn header are in Link G4 Lightning connector pinout.